RE: RE: IML: Budd Rotors - a 300 guy wants in as well
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: IML: Budd Rotors - a 300 guy wants in as well



I’ve gone through my shop manual for the ’67 and can’t find any indication that the actual rotors are a different size. ?However, it does indicate the wheel lug bolt pattern as being 5 x 4 ½ for all models except Imperial. ?From the book, one could assume that all the ’67 Budd rotors were the same but the hubs were different between the Imperial and all other models.

 

Ken

67 Crown 4 Dr Ht

 

 


From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Frederick Joslin
Sent: Thursday, March 02, 2006 9:25 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Fw: RE: IML: Budd Rotors - a 300 guy wants in as well

 



----- Original Message -----
From: "Adamo, Nicholas C"
To: "'Frederick Joslin'"
Subject: RE: IML: Budd Rotors - a 300 guy wants in as well
Date: Thu, 2 Mar 2006 05:28:36 -0500


Fred Joslin

 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.