RE: IML: 73 in the dark, Part Deux

["Robin Giesbrecht" <robings@xxxxxxxxxxx>]

That wire got really hot. I will bet that the connection right at the 
ignition switch is giving you grief also. By the way the ignition switch is 
easy to remove, take apart and check/clean. It is quite robust.

Robin Giesbrecht
72 Imperial

> From: jhplc@xxxxxxxxxxx
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: IML: 73 in the dark, Part Deux
> Date: Thu, 02 Mar 2006 04:11:43 +0000
>
> Thanks to everyone for their advice...I took the vent control plastic cover 
> off and found the red wire in the plastic connector was melted, so I jumped 
> it and still nothing.According to Elijah, the ignition switch is probably 
> bad, so I am now looking for a new one. I checked NAPA Online, and they 
> only have the not T&T column one available..being the T&T column was made 
> by GM...(yes, it's true..) would a GM switch be the same, or would the plug 
> be different?
>
> Thanks,
>
> Jerry
> In the dark




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm