IML: 65 Crown Speakers: 4 OHM Compatible with 8 OHM Radio???

[Christian Walter <cdubya2000@xxxxxxxxx>]

Hello Everyone---

I'm trying to replace the front speaker on my Model
367 Mopar AM/FM radio. I can't locate an 8 OHM speaker
for the replacement as all shops in my area only carry
4 OHM in that size (It's a 7" but I'm going to use a
6.5" with an adapter plate). 

I went to our Imperial website and did my research.
Unfortunately, the advice on the site ranged from "4
through 16 OHM...it doesn't matter." to "You WILL
damage your radio if you use a 4 OHM speaker with your
8 OHM radio."

Which to believe? 

1) Will I fry the stock radio by installing the 4 OHM
speaker? 
Or 
2) Will the 4 OHM work just fine with no real impact
on my stock radio?

I greatly appreciate any advice!

Thanks...

CHRIS WALTER
Modesto, CA




	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm