RE: IML: rear leaf springs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: rear leaf springs



www.espo.com Laura should have what you need.


From: "kenneth chilton" <finfan@xxxxxxxxxxxxx>
hello usa

having just renewed the exhaust on our 57 crown my attention has turned to the rear springs, which are so badly worn that the [ arc ] is the opposite way . i am seriously thinking of buying new ones from the states and shipping them over but it is not cheap .
if by chance i had them retempered and reshaped is there any measurements that i should be giving the spring shop to ensure that they are bent to the correct arc , ie overall length of spring when bent depth of arc etc .


is retempering a recommended way of fixing sagging springs or should one aim for new

regards ken uk





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.