Re: IML: engine problems

["Mark Martin" <1966.newport@xxxxxxxxxxx>]

have you tried disconnecting the booster and plugging the hose? Do that 
before you buy a new one. also, if available, plug a vacume gauge intot he 
booster and then step on the brake....the gauge should rise then hold...if 
it rises then falls off, it's bad

----- Original Message ----- 
From: "JAY D'ANGELO" <cadij@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, September 20, 2005 7:42 PM
Subject: RE: IML: engine problems


> Thanks for all the suggestions.  It seems that some of you were correct. 
> The power brake booster is leaking - the engine starts running rough when 
> I apply the brakesa, otherwise it idles properly.  Tomorrow morning it 
> goes in for the new unit and I hope that will take care of the problem.  I 
> guess my concern about it not getting up and going is simply because it is 
> one heavy car.
>
> I'll let you know the results, thanks.  I have to go sop up the spilled 
> blinker fluid from my carpet before it dries in the hot Las Vegas sun.
>
> Jay
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please reply to 
> mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm