IML: Window Switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IML: Window Switch
- From: "Eric" <gearhead@xxxxxxxxxxxxxxxx>
- Date: Tue, 23 Aug 2005 10:04:07 -0700
Joe, Its been a while since I last played w/ my 63's windows but that does
ring a bell, it seems that the other switches didn't work if the master
switch was unplugged. I don't know the circuitry well enough to know if the
master needs to be hooked up or not. I removed the master switch on my car
one day to find that the pad behind it was most the way off, then the
windows resumed operation after I pressed it back on, of course. Then I did
the fix I mentioned so it would hold together.
Eric
Portland, Oregon
______________________________________________________________________
Would this problem be evident in both switches though (the master switch at
the driver's door & the switch at the driver's side rear door)? Is that
possible?
--
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network