Re: IML: '62 bearings (ouch)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: '62 bearings (ouch)



>From: Kenyon Wills <imperialist1960@xxxxxxxxx>
>Subject: IML: Spun Bearing - in block cure?
>
>I have a 1962 that has an awful knocking sound.
>
>Anyway:
>
>Removed the engine yesterday and dis-assembled today.
>
>Broken con-rod bolt with nut on bottom of the pan.
>
>Spun the bearing and took out the ones next to it as
>well.
>
>So now I have a crank still in the block with streaky
>grooves in it from the bearing spinning.

   Yikes! What the heck did they do to leave a 413 in this condition, shift
into 1st at 100mph?

   I'm afraid I've never heard of an in-block fix, but I wish you the best
of luck.
         -Kle.
         '69 Crown 4DHT




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.