Re: IML: 62 Brake Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 62 Brake Problem



The first thing I would check is to be sure they are adjusted properly. This can be a bit tricky if you haven't done it before on a 60-62. All adjusters, with the exception of the rear most ones on the rear wheels tighten in the direction of the wheel forward rotation. the rear most ones on the rear wheels tighten opposite the forward rotation. There are illustrations of this procedure in the service manual.

Did they release properly before work was done?
John
----- Original Message ----- From: "Alexandra Rand Ashton" <62imperialcoupe@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, July 01, 2005 1:04 PM
Subject: IML: 62 Brake Problem



Hello list- I am looking for some help with my brakes for my 62 Crown Coupe. The brakes just don't want to release all the way. The car has all new parts- including a re-built booster. Does anyone know what the proper length should be for the booster rod that extends into the master cylinder? I believe that this may be the problem. The manual states to bring the booster in to the dealer for adjustment. Any thoughts? Thank you.

Gary R Ashton
62 Crown Coupe





----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.