IML: Breaking in a Rebuilt 413 - '59 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Breaking in a Rebuilt 413 - '59 Imperial



The restoration of my 1959 Imperial is nearly complete and soon it will be time to start up the rebuilt 413. I was planning to use Mobil One synthetic oil, but the guys at NAPA warned me not to use synthetic oil at first but to break the engine in with normal oil. They said I might spin a bearing with synthetic oil. I've had good results using Mobil One in my other cars, but their engines already had at least a several thousand miles on them.

Anybody on the list have recommendations about using synthetic oil in a newly rebuilt engine?
Also what would be a good approach for breaking in the engine regardless of what oil I use? If I drive it home from the restoration shop it will be a trip of about 500 miles.


- Charlie Hansen
1959 Imperial Le Baron



----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.