RE: IML: A question about 413 Pistons

["W.Roddick" <1roscoe@xxxxxxxxxxxxx>]

Thanks all, for your replies on the wrist pins.

 

Now, who the heck sells oversized cast pistons for the 413 that are NOT the 8 to 1 compression truck/industrial types?

 

Bill

---

From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Duckie26626@xxxxxxx
Sent: Sunday, April 03, 2005 3:32 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: A question about 413 Pistons

Hi to All:  The 413 as with most B/RB Engines used pressed in Wrist Pins. You will need to be careful if you try press them out yourself.  A good machine shop is the best bet.

 

Dave V.   Chrysler Trenton Engine Plant Home of your 413 (440's too).