Re: IML: Power window motors

["mike and cindy" <mbecker30@xxxxxxxxxxx>]

Rob, you inspired me!
  I went to home depot and bought all the 1/2 by 1/2 bushings they had (12) 
and some lithium grease, I already sent my switches off to Elijah Scott for 
rebuild, going to tackle those motors next. any pointers ?

mike Becker 67 imps
----- Original Message ----- 
From: "Rob McCall" <Rob_Mopar@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, March 29, 2005 7:47 PM
Subject: IML: Power window motors


> I took a trip over to the Depot today at lunch and bought a few nylon
> bushings to replace the pulverized ones in my driver's window motor, and a
> fresh can of lithium grease.  The 1/2" diameter by 1/4" height bushings
> looked a little short, but I bought a few of them as well as a few of the
> 1/2" x 1/2" and went back to work.
>
> Tonight it took some effort to get the new bushings installed.  Is there
> supposed to be any play once the bushings are installed in the larger 
> nylon
> gear with the metal center piece installed?  I don't have any.
>
> I bench tested it and it does work in both directions.  I thought I'd 
> check
> in here before reinstalling everything back in the door.
>
> Thanks,
> Rob McCall
> '67 LeBaron
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm