|
what is the trick to get the cover off? I have taken the two bolts off the back. is that all that holds it on? -----Original Message----- From: eddee [mailto:eddee@xxxxxxxxxxxxx] Sent: Thursday, October 30, 2003 11:51 AM To: goldenfin@xxxxxxxxxxxxxxx Subject: Re: [GFS] ?power steering leaks That o-ring replacement should be no problem no matter what pump,,,you may want to try and replace the reservoir cover!! . If its bent a new oring may not help. Anyway--it is a standard oring,,,can be obtained from any plumbing supply. IF you are lucky you have the new pump. The pulley must be a press on type and the return flow is to the reservoir,,, not the pump casting itself. That an easy way to tell. GOOD LUCK ----- Original Message ----- From: Jennifer & Will Weaver To: goldenfin@xxxxxxxxxxxxxxx Sent: Thursday, October 30, 2003 2:52 PM Subject: RE: [GFS] ?power steering leaks how do you identify the pump? the numbers I find are a14----1738652 and 4cs. napa goes back to 58, the ring for the reservoir is the leak. it looks like some one had knocked the reservoir cover on around the edge. thanks ps how many people are going to drive around Halloween? has anyone had end front brake stick ( will not roll forward but will roll backwards) ? -----Original Message----- From: eddee [mailto:eddee@xxxxxxxxxxxxx] Sent: Thursday, October 30, 2003 10:19 AM To: goldenfin@xxxxxxxxxxxxxxx Subject: Re: [GFS] ?power steering leaks IT is easy to rebuild--I could not believe how easy,,,as long as you have the late 57 through 66? pump. (CALLED THE SLIPPER PUMP) The earlier pump is a nightmare. Are you talking about the o ring for the reservoir or the seal for the shaft under the front pulley? Both were shot on my slipper pump and easily replaced. ED ECKERSON LI NY ----- Original Message ----- From: Jennifer & Will Weaver To: goldenfin@xxxxxxxxxxxxxxx Sent: Thursday, October 30, 2003 12:48 PM Subject: RE: [GFS] ?power steering leaks has anyone every replace a 0 ring seal on a 57 belvedere power steering pump? and is a 57 and 58 power steering pump the same? -----Original Message----- From: furylvr@xxxxxxx [mailto:furylvr@xxxxxxx] Sent: Wednesday, October 29, 2003 11:00 PM To: goldenfin@xxxxxxxxxxxxxxx Subject: Re: [GFS] ? re Eastwood Been away for awhile--Just to let you know, I have had excellent results with POR-15. Forms a really hard surface and can be painted (it is black). All's well up here. Looking forward to next newsletter. Glad you stayed on!! Plan a driving trip to Laughlin in the spring==may pass thru Salt Lake. Will let you know. Bob [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
|
Back to the Home of the Forward Look Network