The Forward Look Network | ||
| ||
Classic Fabrication - Floor Pans Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> Vendor Discussion | Message format |
58 Ray |
| ||
Location: Colorado | I forgot who recomended Classic but Thank You! Richy was great to deal with and shipped new floor pans for my 58 Plymouth as described and quickly. Would defintely recomend! Cheers, Ray | ||
desoto_zealot |
| ||
Veteran Posts: 193 Location: FL | Thanks Ray, I've been wondering if anybody had a good experience with them. I called them up the other day but they were closed - they have unusual business hours. I figured it was probably a one-man type deal. I"ll try them again real soon. | ||
Dave L. |
| ||
Extreme Veteran Posts: 340 Location: Tacoma, WA | That's great to hear. I've told people about them, but had never heard from anyone who actually bought from them. Great news, as I'll be needing some, too. Thanks for the feedback. Wish they were easier to contact. Edited by Dave L. 2006-03-19 10:39 PM | ||
peachcasino |
| ||
Extreme Veteran Posts: 394 Location: GREEN BAY WI AREA | Theres some pics of classics floor pans in the parts for sale section near the bottom of the page. | ||
desoto_zealot |
| ||
Veteran Posts: 193 Location: FL | I also came across this about Classic Fabrication on the Plymouth Central website. http://free.phpbb-host.org/phpbb/viewtopic.php?t=798&postdays=0&pos... | ||
DV-800 |
| ||
Veteran Posts: 117 Location: CINCINNATI, OHIO | I've tried calling them several times and left a new message every time. Cannot seem to get a reply. I hope they reply soon. I need the floor pans within the next week or I'll be stuck. I probably keep just missing them. They do have really weird store hours. I'd like to do business with them after hearing the feedback. | ||
58 Ray |
| ||
Location: Colorado | Here are some pics of the Classic floor pans, although they are a little crude I was able to fit them in nicely:
| ||
dougsoldcars |
| ||
Regular Posts: 98 | I got excellent parts, quick service and a friendly guy on the other end of the phone when I bought from them a few weeks ago. | ||
1960 Saratoga |
| ||
Extreme Veteran Posts: 306 | Sounds like everyone is doing well with these. Were these available for 4-doors, 2-doors, or both? My friend and mechanic is probably going to need new floors for his 1959 Dodge Coronet 4 door sedan ("Stella") really soon. Thanks! | ||
58 Ray |
| ||
Location: Colorado | As far as the Plymouth's go the 2 door and 4 door pans are the same. If you call richy he will send you some information. | ||
chrysler300c |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 Location: Twin Falls, Idaho | Ray.... Did you well the driver side inspection cover in??? George | ||
58 Ray |
| ||
Location: Colorado | Good question, that had to be made since the Classic pans did not thave that portion cut out and my orginal inspection plate was rusted out. Ray | ||
n1gzd |
| ||
Veteran Posts: 255 Location: Acton, MA | I am not sure I understand. Can you buy the inspection hatch separately? Rebecca | ||
58 Ray |
| ||
Location: Colorado | Hey Rebecca, I know there are a couple of places that sell the floor pan with the inspection hatch separate from the floor but not from Classic Fabrication you need to cut out that portion and make your own. I believe that RCar you can buy the floor with a separate inspection hatch. I think that answers your question. | ||
narleycharlie |
| ||
Expert Posts: 1812 Location: Slidell La. | Didn t know about that cover , what is there to inspect thru it . NC | ||
chrysler300c |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 Location: Twin Falls, Idaho | If you need to remove your steering box, this is the best route to it.... contrary to what the factory service manual says. It is not easy to get a power steering box past the exhaust manifolds and out the top, especially on a hemi engine. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |