The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
legend57
Posted 2024-05-08 1:58 PM (#635111)
Subject: Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr


Member

Posts: 11

Need the Driver and Passenger side trim piece at the front of the fin (see picture). Needs to be the Coronet version, NOT the Custom Royal.
According to the part number charts, this part is the same between the 2dr and 4dr cars.



(Front Fin Molding.JPG)



Attachments
----------------
Attachments Front Fin Molding.JPG (18KB - 11 downloads)
Top of the page Bottom of the page
22mafeja
Posted 2024-05-10 1:56 AM (#635128 - in reply to #635111)
Subject: RE: Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr


Elite Veteran

Posts: 659
5001002525
Location: Finland		These can be handmade from stainless 2mm steel. I did so and was quite pleased with the result,

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=78941&...
Top of the page Bottom of the page
big m
Posted 2024-05-10 2:06 PM (#635139 - in reply to #635111)
Subject: Re: Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr



Expert 5K+

Posts: 7809
50002000500100100100
Location: Williams California		I have both these potmetal trim pieces. The driver side is very nice, no pitting, the passenger side has some pitting on the top surface.

Please PM me if you are interested, John
Top of the page Bottom of the page
legend57
Posted 2024-05-14 11:31 AM (#635185 - in reply to #635139)
Subject: Re: Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr


Member

Posts: 11

Thanks, John. Will do.
Top of the page Bottom of the page
legend57
Posted 2024-05-14 11:36 AM (#635188 - in reply to #635128)
Subject: RE: Wanted: 1957 Coronet front fin molding - 2Dr or 4Dr


Member

Posts: 11

22mafeja - 2024-05-09 10:56 PM

These can be handmade from stainless 2mm steel. I did so and was quite pleased with the result,

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=78941&...

Wow! You do great work.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)