The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Crank pulley needed
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
wheelcover
Posted 2024-02-04 11:21 AM (#633623)
Subject: Crank pulley needed


Veteran

Posts: 131
10025
Location: Wyoming		I’m looking for a Mopar crank pulley that is 6 1/8” in diameter and 2 1/2” deep (mounting surface to outer edge of the pulley).
Top of the page Bottom of the page
Apollo 61
Posted 2024-02-04 2:18 PM (#633625 - in reply to #633623)
Subject: Re: Crank pulley needed



Elite Veteran

Posts: 769
5001001002525
From what kind of motor?
Year?
CID ?
A/C?
Top of the page Bottom of the page
finsruskw
Posted 2024-02-04 4:25 PM (#633628 - in reply to #633625)
Subject: Re: Crank pulley needed


Expert

Posts: 2289
2000100100252525
Location: Eastern Iowa		Number of sheaves?
diameter of the sheaves?
Bolt pattern?

Lots of variables here.
How about a part number?
Top of the page Bottom of the page
wheelcover
Posted 2024-02-05 4:36 PM (#633635 - in reply to #633623)
Subject: RE: Mopar V8 Crank pulley needed


Veteran

Posts: 131
10025
Location: Wyoming		I regret that I didn’t specify the pulley I need was for a Mopar V8. I didn’t specify bolt pattern because I’m under the impression that all Mopar V8s prior to at least 1970 used the same (asymmetrical) 6-bolt pattern for the crank pulley (Dodge, DeSoto, Chrysler, Plymouth, small block, big block, hemi) - only difference is the depth and diameter of the pulley for different engines and different accessories. Other members that have more knowledge than me are welcome to chime in if this is not the case. The crank pulley I need is for a 57 Dodge 325, which I believe is actually not important. Only one groove is needed, at the 2 1/2” mark as specified, but others might work too, I just need one belt groove at 2 1/2” - my preference is that is the only belt groove. The 6 1/8” is the diameter of the largest part of the pulley, at the top of the groove - if there’s a better way to state pulley dimensions, I’m honestly unaware of it - please educate me.
Top of the page Bottom of the page
mstrug
Posted 2024-02-05 5:18 PM (#633636 - in reply to #633623)
Subject: Re: Crank pulley needed



Expert 5K+

Posts: 6500
50001000500
Location: Newark, Texas (Fort Worth)		https://www.ebay.com/itm/335230227635?_trkparms=amclksrc%3DITM%26aid...
OMPOSITELISTINGS%26ao%3D1%26asc%3D20220405142716%26meid%3De4b2e132d46845fba2b67aa099100d90%26pid%3D101506%26rk%3D1%26rkt%3D25%26sd%3D204607025471%26it
01506%26rk%3D1%26rkt%3D25%26sd%3D204607025471%26itm%3D335230227635%26pmt%3D0%26noa%3D1%26pg%3D4247815%26algv%3DAlgoIndex5SimRanker%26brand%3DMopar&_tr
5%26algv%3DAlgoIndex5SimRanker%26brand%3DMopar&_trksid=p4247815.c101506.m1851
A bunch on Epay:
Top of the page Bottom of the page
56D500boy
Posted 2024-02-05 5:18 PM (#633637 - in reply to #633635)
Subject: RE: Mopar V8 Crank pulley needed



Expert 5K+

Posts: 9908
500020002000500100100100100
Location: Lower Mainland BC		.
I think you are looking for a 1674 744 pulley which is described as "w/o Power Steering, Single Groove,
6 1/8" O.D., S27, LD2, 57-58 Dodge, 57 Desoto ( Firesweep)"

That might help you searching for used parts in wrecking yards, e.g.

French Lake Auto Parts in Minnesota
Big M in California
Wildcat Mopars in Oregon


Top of the page Bottom of the page
wheelcover
Posted 2024-02-05 5:38 PM (#633638 - in reply to #633636)
Subject: Re: Crank pulley needed


Veteran

Posts: 131
10025
Location: Wyoming		Thanks for the eBay link - saw that one already and just trying to avoid using a 1/4” spacer to have it align. Much appreciated. I assume there are folks out there with boxes of miscellaneous Mopar pulleys, etc. they’d like to sell. Hoping one of the sees this ad.
Top of the page Bottom of the page
56D500boy
Posted 2024-02-05 5:47 PM (#633639 - in reply to #633638)
Subject: Re: Crank pulley needed



Expert 5K+

Posts: 9908
500020002000500100100100100
Location: Lower Mainland BC
wheelcover - 2024-02-05 2:38 PM

Thanks for the eBay link - saw that one already and just trying to avoid using a 1/4” spacer to have it align.
.


Last time I checked 2 3/8" was only 1/8" away from 2 1/2". Based on that accurate looking wooden ruler, it might really be
the one you need. Or only a 1/8" aluminum spacer away.

https://www.ebay.com/itm/335230227635

Top of the page Bottom of the page
wheelcover
Posted 2024-02-05 6:13 PM (#633640 - in reply to #633637)
Subject: RE: Mopar V8 Crank pulley needed


Veteran

Posts: 131
10025
Location: Wyoming		Appreciate the part number, Dave - should simplify the search. Hoping there are other non-1957 pulleys that won’t interfere with idler and will line up, because I suspect finding the exact part number is going to be difficult. Your research and information is always greatly appreciated.
Top of the page Bottom of the page
56D500boy
Posted 2024-02-05 7:41 PM (#633641 - in reply to #633640)
Subject: RE: Mopar V8 Crank pulley needed



Expert 5K+

Posts: 9908
500020002000500100100100100
Location: Lower Mainland BC		.
I've already checked my usual sources of NOS parts (eBay, Parts House Clearance, Mopar Mall, Hiltop and Len Dawson Mopar) and
none of them have a 1674 744, hence my suggested sources of used parts.

Good luck.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)