The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Hints for removal of fine scratches from chromed pot metal?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
56D500boy
Posted 2022-11-02 11:06 AM (#625332)
Subject: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 9898
500020002000500100100100252525
Location: Lower Mainland BC		.
I know how to remove fine scratches from stainless steel trim (wet sanding with 1000-1500-2000-2500 grit and then polishing). However, I don't know what to do with chromed pot metal with fine scratches.

First of all, I am happy with the case-in-point 56 Dodge wiper pivots that I bought off eBay last week (and received yesterday). They are nice and unpitted as was shown in the eBay photos. So thanks to the seller Bruce at CT Classic Car Parts. (They have more than just Mopar parts) I would buy from them again.

https://www.ebay.com/str/ctclassiccarparts
https://www.connecticutclassiccarparts.com/

All that said (and the infomercial over), while they are smooth, they have some fine scratches.

I know I could have them rechromed but they are actually too nice (and I already have enough $ in them). The one with the working pivot arm is much less scratched than the one with the broken pivot arm (I know how to fix the problem)

So far, I've tried AutoSol which did clean them up nicely but it did not remove the fine scratches.

Any hints?

Photos: eBay and then my kitchen stove top:






(eBayPhoto56DodgeWiperPivot.jpg)



(DaveFsNeweBay56DodgeWiperPivotBases_fineScratches.jpg)



Attachments
----------------
Attachments eBayPhoto56DodgeWiperPivot.jpg (55KB - 51 downloads)
Attachments DaveFsNeweBay56DodgeWiperPivotBases_fineScratches.jpg (112KB - 53 downloads)
Top of the page Bottom of the page
wizard
Posted 2022-11-02 4:03 PM (#625335 - in reply to #625332)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		When a seller states "will probably buff out" - it won't.

The chrome is really a thin layer and scratches is normally to deep to buff out.

You could try potato flour that can remove polishing roses on stainless steel
Top of the page Bottom of the page
60 dart
Posted 2022-11-02 5:40 PM (#625340 - in reply to #625332)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 8947
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA		When a seller states "will probably buff out" - it won't.
Top of the page Bottom of the page
56D500boy
Posted 2022-11-02 9:25 PM (#625342 - in reply to #625335)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 9898
500020002000500100100100252525
Location: Lower Mainland BC
wizard - 2022-11-02 1:03 PM.
You could try potato flour that can remove polishing roses on stainless steel


I have no idea about potato flour (or where to buy some).

But I will try.

I tried WENOL polish this afternoon on the worst piece. No improvement.

Top of the page Bottom of the page
Powerflite
Posted 2022-11-02 11:30 PM (#625344 - in reply to #625332)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 9649
50002000200050010025
Location: So. Cal		A: Live with it
B: Deep wax or clear paint
C: Re-chrome
Top of the page Bottom of the page
57chizler
Posted 2022-11-03 12:14 PM (#625347 - in reply to #625332)
Subject: RE: Hints for removal of fine scratches from chromed pot metal?



Expert

Posts: 3775
20001000500100100252525
Location: NorCal
Lots of YouTube videos showing scratch removal. You can't really "remove" the scratches but you can mitigate their appearance.
Top of the page Bottom of the page
22mafeja
Posted 2022-11-05 2:15 AM (#625372 - in reply to #625332)
Subject: RE: Hints for removal of fine scratches from chromed pot metal?


Elite Veteran

Posts: 649
50010025
Location: Finland		You can actually remove the scratches by sanding away the chrome and copper completely. Then you polish the potmetal surface until it shines again.
Of course it is not chrome but it will be surprisingly beautiful. And the shine is not disappearing anywhere. Imo it takes years before it shows any
dullness. This of course suits better on pieces that are easy to sand by sanding belts. It is dirty and unpleasant but I have done it with several parts.
Top of the page Bottom of the page
mstrug
Posted 2022-11-05 5:59 AM (#625374 - in reply to #625332)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 6498
50001000100100100100252525
Location: Newark, Texas (Fort Worth)		https://www.advancedplating.com/site/
Top of the page Bottom of the page
56D500boy
Posted 2022-11-05 1:37 PM (#625385 - in reply to #625374)
Subject: Re: Hints for removal of fine scratches from chromed pot metal?



Expert 5K+

Posts: 9898
500020002000500100100100252525
Location: Lower Mainland BC
mstrug - 2022-11-05 2:59 AM
https://www.advancedplating.com/site/


Thanks for that link Marc. Not that I will use that particular shop but I have a whole new respect for quality work (not like the crap that my local guy does)(I think he skips a few steps)

https://www.advancedplating.com/site/Processes.html



Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)