![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Wanted - All Wanted Ads | Message format |
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Need the rear piece that extends down the back of the roof next to the rear tailgate window as seen missing on the passenger side in the picture below. I could really use some of the clips that attach the whole length of trim as well. Edited by jboymechanic 2020-03-19 10:42 PM (thumb_IMG_0554_1024.jpg) Attachments ---------------- ![]() | ||
| |||
60SportSuburban![]() |
| ||
Location: Wilmot, SD | I think I have 1 but I don't know how I would ship it. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1234 ![]() ![]() ![]() ![]() Location: Ramona, CA | I need one for my wagon that has the grab bars and that piece alone is 100.5 inches long by itself. You should be able to use one from any 1960-64 full size wagon without the grab bars. | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | I have the long piece, really nice NOS that the seller shipped by FedEx smart post sealed up in a PVC pipe. Was perfect when it got here. I still need the shorter piece that runs down by the rear windshield, and some clips yet if anyone has them. | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Still looking for this back roof trim piece. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1234 ![]() ![]() ![]() ![]() Location: Ramona, CA | jboymechanic - 2020-04-02 10:55 AM I have the long piece, really nice NOS that the seller shipped by FedEx smart post sealed up in a PVC pipe. Was perfect when it got here. I still need the shorter piece that runs down by the rear windshield, and some clips yet if anyone has them. Is your left side two pieces? It should be one continuous piece from the windshield down to the tailgate. I need the shorter one that is 100.5" long as I have grab bars. I need a right hand side one. Do you know the part number of the NOS one you got? Nick. | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | To be honest, I don't know if the drive side piece is a single piece or not. There are so many other needs that I haven't paid too much attention, but I want to make sure to get the passenger side so I don't end up with any roof leaks. The NOS one I got is # 2196252, I received a tip from a member here that it was for sale and right for my wagon, so I bought it. It is about 100" long with a point on one end and a straight cut on the other end. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1234 ![]() ![]() ![]() ![]() Location: Ramona, CA | jboymechanic - 2020-04-27 11:19 AM To be honest, I don't know if the drive side piece is a single piece or not. There are so many other needs that I haven't paid too much attention, but I want to make sure to get the passenger side so I don't end up with any roof leaks. The NOS one I got is # 2196252, I received a tip from a member here that it was for sale and right for my wagon, so I bought it. It is about 100" long with a point on one end and a straight cut on the other end. That's the one I need for my car. I was going to buy the one you need from someone and cut it off to make it fit mine. I'll send you a private message with the contact info of the guy who has a wagon he'll sell the molding off of. I looked at the car in his yard. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1234 ![]() ![]() ![]() ![]() Location: Ramona, CA | This is from the 1964 parts book. The clips are part number 6006301. 14 per side on your car. 10 per side on mine. Edited by NicksGarage 2020-04-27 4:46 PM (64_dodge_880.png) Attachments ---------------- ![]() | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Ok, I emailed Gary Grossich. If I can work a deal with him on the piece I need I'll sell you the piece I have for what I paid. The link to my purchase is below: https://www.ebay.com/itm/NOS-Mopar-1960-61-Dodge-Plymouth-Chrysler-s... | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Nick, I talked to Gary today, he suggested that you go get the molding I need for my car and then we work out swapping parts. That's ok by me, is it ok by you? | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Still looking for the roof trim for this car. I either need the single piece for the passenger side or I'd take grab handle versions for both sides. | ||
| |||
NicksGarage![]() |
| ||
Expert Posts: 1234 ![]() ![]() ![]() ![]() Location: Ramona, CA | I found you a pair of the ones you need. I'll reply to our private discussion but wanted to post a picture. (a97251180_901215230361044_7506531513945554944_n.jpg) Attachments ---------------- ![]() | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | PM sent. | ||
| |||
jboymechanic![]() |
| ||
Expert Posts: 2216 ![]() ![]() ![]() Location: Muskego, WI | Still looking for any form of room trim for my 1960 Plymouth wagon. | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |