The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Brakes, Wheels and TiresMessage format
 
56D500boy
Posted 2020-01-15 1:33 AM (#592967)
Subject: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert 5K+

Posts: 5801
5000500100100100
Location: Lower Mainland BC
.
I am not sure if the part number was stamped on the wheels or not, but if you have some Imperial wheels from a 55 or 56 Imperial with the 5.5" bolt circle, could you check and report back? (Please)

Thanks in advance. The result will be in a D500 post that I will be doing soon.

Top of the page Bottom of the page
jboymechanic
Posted 2020-01-15 2:02 PM (#592982 - in reply to #592967)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert

Posts: 1809
1000500100100100
Location: Muskego, WI
Standard steel wheels or wire wheels?
Top of the page Bottom of the page
56D500boy
Posted 2020-01-15 2:48 PM (#592984 - in reply to #592982)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert 5K+

Posts: 5801
5000500100100100
Location: Lower Mainland BC
jboymechanic - 2020-01-15 11:02 AM
Standard steel wheels or wire wheels?


Sorry. Steel. Either or both of the vented or non-vented as shown below:





(1950-51-52-53-54-1955-1956-ChryslerImperial5x5point5Wheel.jpg)



(1956-ChryslerImperialCrownShowingThe5x5point5wheels.jpg)



(VentedImperialWheel.jpg)



(1956-ChryslerImperialLimo_VentedWheels_2.jpg)



Attachments
----------------
Attachments 1950-51-52-53-54-1955-1956-ChryslerImperial5x5point5Wheel.jpg (224KB - 20 downloads)
Attachments 1956-ChryslerImperialCrownShowingThe5x5point5wheels.jpg (181KB - 19 downloads)
Attachments VentedImperialWheel.jpg (62KB - 19 downloads)
Attachments 1956-ChryslerImperialLimo_VentedWheels_2.jpg (230KB - 18 downloads)
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-16 9:35 PM (#593069 - in reply to #592967)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert

Posts: 1809
1000500100100100
Location: Muskego, WI
My steel wheels are mounted on my parts car, which is buried under a mountain of parts at my dad's house. Doubt I will be able to get a part number any time soon.
Top of the page Bottom of the page
56D500boy
Posted 2020-01-17 2:15 PM (#593108 - in reply to #593069)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert 5K+

Posts: 5801
5000500100100100
Location: Lower Mainland BC
.
I guess that I am hoping that somebody (anybody?) can confirm that the C73 solid(ish) Imperial (and S23 and C71 and C72 Estate Wagon) 15 x 6 x 5.5 in bolt circle wheels are PN 1633 066 and that the C70 Crown Imperial ventilated wheels are PN 1633 073. These numbers show up in both my 56 Chryco hardcopy and 56 Mopar pdf parts catalogues.







(56ChrycoWheelPNs_Including56DodgeD5001653360.jpg)



(56MoparWheelPNs_Including56DodgeD5001653360.jpg)



Attachments
----------------
Attachments 56ChrycoWheelPNs_Including56DodgeD5001653360.jpg (232KB - 18 downloads)
Attachments 56MoparWheelPNs_Including56DodgeD5001653360.jpg (155KB - 18 downloads)
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-17 2:41 PM (#593110 - in reply to #592967)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert

Posts: 1809
1000500100100100
Location: Muskego, WI
C-70 = limo, those used the vented wheels. This would suggest that 1633073 is the vented wheel.
C-73 = Imperial, those used solid wheels or wire wheels. This would suggest that 1633066 is the solid wheel.

It's strange that the parts catalog would list the same part number for wheels between Chrysler and Imperial as the Imperial has the larger bolt pattern and wheels don't interchange.
Top of the page Bottom of the page
56D500boy
Posted 2020-01-17 5:49 PM (#593117 - in reply to #593110)
Subject: Re: Looking for the Part Number for the 56 Imperial wheels with 5.5" bolt circle



Expert 5K+

Posts: 5801
5000500100100100
Location: Lower Mainland BC
jboymechanic - 2020-01-17 11:41 AM
C-70 = limo, those used the vented wheels. This would suggest that 1633073 is the vented wheel.
C-73 = Imperial, those used solid wheels or wire wheels. This would suggest that 1633066 is the solid wheel.
It's strange that the parts catalog would list the same part number for wheels between Chrysler and Imperial as the Imperial has the larger bolt pattern and wheels don't interchange.


Agree with the 1633 066 = solid, C73 Imperial and 1633 073 = Vented, C70 Crown Imperial (8 passenger). Have another look at the 1633 066 cross-overs to Chrysler (and Desoto). It's only for the S23, C71 and C72 Estate Wagons, which were apparently deemed heavy duty, and got the 5.5" bolt circle wheels, just like the C73 Imperials.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)