The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

'55 Chrysler Rear Spring U-bolts
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
Don W.
Posted 2019-10-09 5:04 PM (#588625)
Subject: '55 Chrysler Rear Spring U-bolts


Member

Posts: 22

Replacing my U bolts. Did they use lock washers on these U-bolts? Seems they should have but My car does not have them on, but my springs were replaced in the late '70's, so I'm not positive.
Thanks!
Top of the page Bottom of the page
Shep
Posted 2019-10-09 7:48 PM (#588635 - in reply to #588625)
Subject: Re: '55 Chrysler Rear Spring U-bolts



Expert

Posts: 3131
2000100010025
Location: Chestertown, NY ( near Lake George)
My oe springs did not have washers, torque to 85#, then recheck them after a 100 miles or so.

Edited by Shep 2019-10-09 7:49 PM
Top of the page Bottom of the page
Don W.
Posted 2019-10-09 7:54 PM (#588637 - in reply to #588625)
Subject: RE: '55 Chrysler Rear Spring U-bolts


Member

Posts: 22

Thank You, Shep!
Don
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)