Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | take anything big off , like gen , fan and speedo cable ground cable . get everything out of the way you can . looks like there is only 2 bolts per front motor mounts bolts pointing down you need to worry about
old exhaust pipe rusty , cut it . exhaust ,manifolds next . but if you cut the old pipes close to the manifolds , that should be enough . those trans cross member bolt threads look bad . if you can dremel
the threads as much as possible , soak em with good oil , they might come off . or you can torch the nuts only "red hot" they'll come right off after cleaning of course . don't want to forget the driveshaft .
pretty much go over the motor and trans lookin to make sure nothin is connected that will impair motor removal . it's pretty much just time consuming but kinda easy , even for beginners -----------------------------------later
Edited by 60 dart 2019-01-07 3:35 PM
|