![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I am going to be parting out a '57 New Yorker 2dr and possibly a 58 Desoto 4dr. I do have some good sheet metal. No motor or trans. Contact me with needs. No 2dr rear glass Edited by FINS! 2017-11-04 11:03 AM | ||
| |||
springsweptwing![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: Blackpool, United Kingdom. | Hi Garrett , Does the New Yorker have power windows ? Thanks Paul. | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I'll have to check, it was partially disassembled already. I know I have at least a couple window switches. | ||
| |||
NM Desoto![]() |
| ||
Veteran Posts: 145 ![]() ![]() | I need the rear power window regulators and motors if you have them. | ||
| |||
springsweptwing![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: Blackpool, United Kingdom. | FINS! - 2017-11-04 6:10 PM I'll have to check, it was partially disassembled already. I know I have at least a couple window switches. Ok garrett , I need front and rear power window regulators, let me know if you have them , thanks Paul. | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | Ok will get back to you later this week on these | ||
| |||
kenbiello![]() |
| ||
Veteran Posts: 127 ![]() ![]() | do you have the front bumper guards? | ||
| |||
ToMopar![]() |
| ||
Expert Posts: 1213 ![]() ![]() ![]() Location: D-70199 Heslach | PM send | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I might have the front bumper guards, I will know tomorrow for sure. | ||
| |||
springsweptwing![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: Blackpool, United Kingdom. | springsweptwing - 2017-11-04 9:22 PM FINS! - 2017-11-04 6:10 PM I'll have to check, it was partially disassembled already. I know I have at least a couple window switches. Ok garrett , I need front and rear power window regulators, let me know if you have them , thanks Paul. Hi Garrett, Any luck on power windows? Thanks Paul. | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I think it is a manual window car unfortunately, but it is so piled with stuff and all the door panels are off I am not 100% sure until I go through it. | ||
| |||
kenbiello![]() |
| ||
Veteran Posts: 127 ![]() ![]() | Any luck on those front bumper guards? Thanks!! | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | Keep forgetting to check, sorry, I'll look when I'm at the car in a few days | ||
| |||
kenbiello![]() |
| ||
Veteran Posts: 127 ![]() ![]() | Front bumper guards? | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I have a pair for a '57 | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I have a pair for a '57 | ||
| |||
kenbiello![]() |
| ||
Veteran Posts: 127 ![]() ![]() | can you post a pic or two please? | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | They are nice, I will get some photos when I get back to the car, we just got 12in of snow and it's buried. | ||
| |||
kenbiello![]() |
| ||
Veteran Posts: 127 ![]() ![]() | no problem, stay warm! lol | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | bump still parting this car | ||
| |||
Powerflite![]() |
| ||
Exner Expert 10K+ Posts: 10138 ![]() ![]() ![]() ![]() Location: So. Cal | What are you going to do with the roof from it? | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | I was going to save it and use sections from it to fix the roof on my '58 Desoto, which has a few small holes. I don't know if it's good enough to save as a whole roof? It has some rust around the header and where the rear window would sit. | ||
| |||
FINS!![]() |
| ||
Elite Veteran Posts: 943 ![]() ![]() ![]() ![]() ![]() ![]() | bump, anyone need parts from this? | ||
| |||
geoffs60![]() |
| ||
Veteran Posts: 185 ![]() ![]() ![]() ![]() Location: christchurch New Zealand | would you still have the 58 chrysler radiator. ? thanks Geoff | ||
| |||
agirlandher58![]() |
| ||
Extreme Veteran Posts: 369 ![]() ![]() ![]() ![]() ![]() Location: buchanan,Ga. | a set of trunk hinges | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |