The Forward Look Network | ||
| ||
1956 DeSoto Firedome 2 dr. hardtop Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
Hemi Lover |
| ||
Member Posts: 19 | 56 Firedome. buy the car or parts. Clear title. Frame, floor, and rear quarters rusted out. Good 2 dr. hardtop doors, front end, hood & trunk. Car is very straight & complete, with many parts inside it, what do you need? (DeSoto1.jpg) Attachments ---------------- DeSoto1.jpg (59KB - 623 downloads) | ||
domi |
| ||
Member Posts: 10 Location: France | Hello I am looking for the Rear Window Glass Moulding 3 parts right belt, belt center cap, belt left For chrysler 300 1955 I don't know if the same on your firedome thank you. Domi. | ||
Hemi Lover |
| ||
Member Posts: 19 | PM sent. | ||
RDP |
| ||
Elite Veteran Posts: 1049 Location: PL / EU | Hi, I am looking for the left and right door latch Edited by RDP 2017-12-19 1:12 PM | ||
Hemi Lover |
| ||
Member Posts: 19 | Yes, I have a right hand exterior door latch and two sets of the door jamb latches. PM me your email address so I can send you pictures. Dave | ||
RDP |
| ||
Elite Veteran Posts: 1049 Location: PL / EU | PM sent | ||
jboymechanic |
| ||
Expert Posts: 2196 Location: Muskego, WI | Looking for trim fasteners, PM sent. | ||
FinnDesoto |
| ||
Member Posts: 9 | Hello, I'm looking for a complete left front vent window, also a hood lip molding. | ||
brand209 |
| ||
Veteran Posts: 117 | does it have a good generator in it? | ||
floyd066 |
| ||
Extreme Veteran Posts: 347 Location: Ocean Park, Washington | looking for the driver's side door latch nut plate assembly. 3 nuts are in the assembly. mine was lost when my 56 Chrysler was dipped. it fell out. | ||
Hemi Lover |
| ||
Member Posts: 19 | No generator, but I should have the latch plate assembly. I'll check. | ||
Hemi Lover |
| ||
Member Posts: 19 | No generator, but I should have the latch plate assembly. I'll check. | ||
Steve1956 |
| ||
Regular Posts: 81 | Hi, I am looking for a headlight retainer for a 1956 Dodge Custom Royal. I am wondering if the 1956 Despoto is the same. Do you have one? I will try and attached aphoto also of one same as I am missing. Thanks, Steve | ||
Hemi Lover |
| ||
Member Posts: 19 | Do you need the Chrome ring that goes around the headlight, or the bucket behind the headlight? | ||
Steve1956 |
| ||
Regular Posts: 81 | Hi, Only looking for the bucket that goes behind the headlight. It has the focus adjustment fittings on it. Thank,s Steve (Missing headlight bucket for 1956 Dodge.jpg) Attachments ---------------- Missing headlight bucket for 1956 Dodge.jpg (124KB - 504 downloads) | ||
Hemi Lover |
| ||
Member Posts: 19 | Floyd, Here is the latch, is this what you need? let me know and I will try to remove it. Steve, here is the headlight assembly. Do you think it is the same bucket? Does left or right side matter? Let me know and I will try to remove it (Headlight.jpg) (Latch.jpg) Attachments ---------------- Headlight.jpg (16KB - 470 downloads) Latch.jpg (14KB - 471 downloads) | ||
Steve1956 |
| ||
Regular Posts: 81 | Hi, It looks the same to me. It sits behind the headlight as you know, but I can see the adjustment screw at 12 o'clock. There should be another one at 9 o'clock ( on your left looking at it), and another type of fitting at 5 o'clock. Left or right should be the same. Thanks, Steve | ||
Hemi Lover |
| ||
Member Posts: 19 | Car is sold. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |