|
|
Member
Posts: 44
| For my 58 Plymouth belvedere I'm Looking for the retaining clips that hold in door locks and trunk lock. I need all three. Also do you have the eyebrows, trim piece below trunk in between taillights, the Plymouth trunk letters, and a center horn no power steering button? Thanks |
|
| |
|
Veteran
Posts: 135
| Would you by chance have a 63 imperial on hand |
|
| |
|
Expert 5K+
Posts: 7825
  
Location: Williams California | Fick4fun - 2016-04-21 12:42 PM
Would you by chance have a 63 imperial on hand
I have one lone '63 here, let me know what you're needing, and I'll check.
---John |
|
| |
|
Veteran
Posts: 135
| I am looking for the backup lights lens both if u have them. I am also looking for a front passenger shear panel in inner front fender. That is all I know of as of now. Thanks again for looking |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Fick4fun - 2016-04-21 5:15 PM
I am looking for the backup lights lens both if u have them. I am also looking for a front passenger shear panel in inner front fender. That is all I know of as of now. Thanks again for looking
Not exactly sure by what you call the Shear panel, could you elaborate?
Thanks, John |
|
| |
|
Veteran
Posts: 135
| It is inside the inner front fender goes across up in front of the tire. That is What chrysler called it. I'll try to find a pic of one |
|
| |
|
Veteran
Posts: 135
| This is a pic of the left side
 ($T2eC16VHJGYFFlJv5gbCBSPH+VCt8w~~60_1.jpg)
Attachments
----------------
 $T2eC16VHJGYFFlJv5gbCBSPH+VCt8w~~60_1.jpg (15KB - 656 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Fick4fun - 2016-04-26 5:18 AM
This is a pic of the left side
I do have a good solid one for the RH side, the price is $55 plus shipping.
Please let me know if you are interested, John |
|
| |
|
Veteran
Posts: 135
| Yes I am interested. And also do u still have The back up lens.thanks Brandt |
|
| |
|
Extreme Veteran
Posts: 375
Location: milano, italy | John
need inner fenders, top of fin ornament, rear brakes, door sills rear valance for my 58 Plymouth...please reply. Thank you |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | antonellomopar - 2016-05-03 11:08 PM
John
need inner fenders, top of fin ornament, rear brakes, door sills rear valance for my 58 Plymouth...please reply. Thank you
I have both inner fenders with no rust or damage, also rear brake shoes and hardware. I did recently pick up some rear valances and a good pair of sills, but I am missing those on two of my cars, and need to keep them. What Fin top ornament are you referring to?
Please let me know, John |
|
| |
|
Member
Posts: 12
| Looking to convert 58 Belvedere to power steering. Need gearbox and steering column. Do you have anything? I believe 58-62 will work |
|
| |
|
Veteran
Posts: 135
| Hey big m trying to get parts that were bought from earlier and noticed that crazy body work done in the 705 has made it hard to fit the parts. On that 63 imperial do you have the whole front fender rt one that is . I'm not even sure if it's easy to change the fender. Just thought I'd ask..
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I do have the RF fender, but I'll have to check its condition. I will be away for several days, but please give me a reminder if you need it.
---John |
|
| |
|
Extreme Veteran
Posts: 494
Location: Alberta | I'm looking for a 57 Dodge Coronet front fender emblem? Can you believe I can't believe it that I'm short of 57 Dodge parts and have to search for this simple item. epay doesn't even have one listed |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | RUSTORICHES - 2016-06-04 9:16 PM
I'm looking for a 57 Dodge Coronet front fender emblem? Can you believe I can't believe it that I'm short of 57 Dodge parts and have to search for this simple item. epay doesn't even have one listed
I have one in excellent condition, with nice chrome. Figure $40 plus postage.
Please let me know if you are interested, John |
|
| |
|
Member
Posts: 21
| Hello Big M
Have you rear bumper side extension for Desoto 57-58 ?
John |
|
| |
|
Veteran
Posts: 131
| PM sent... |
|
| |
|
Veteran
Posts: 189
Location: Melbourne/ Australia | Hi john I'm looking for an old steering wheel to restore any car you need done I'm starting a wheel restoration business . I'm in Australia I've been a panel beater for 25 years and done many wheels Aussie, Buick , MG . I'm looking at doing pearl coatings and standard baker light repairs to original . I won't be recasting it will repairing the original wheel , just looking for something you need done at no cost to you I just want to show you what I can do thanks Paul |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Paul1957 - 2016-07-15 4:53 AM
Hi john I'm looking for an old steering wheel to restore any car you need done I'm starting a wheel restoration business . I'm in Australia I've been a panel beater for 25 years and done many wheels Aussie, Buick , MG . I'm looking at doing pearl coatings and standard baker light repairs to original . I won't be recasting it will repairing the original wheel , just looking for something you need done at no cost to you I just want to show you what I can do thanks Paul
Paul, would one from a '57 Plymouth suffice? Let me know, and I'll get it sent out to you.
---John |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | Hey John! You don't happen to have a running flat head six that would work in a 59 Plymouth do you? How about a right rear lower quarter panel section for the same car? |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | I definitely do not have a good running six, but I'll check on the RH quarter panel.
---John |
|
| |
|
Regular
Posts: 90
Location: Banks, Oregon | big m - 2016-07-16 4:18 PM
I definitely do not have a good running six, but I'll check on the RH quarter panel.
---John
This is a picture of the rust I'm trying to find the patch for.
|
|
| |
|
Veteran
Posts: 189
Location: Melbourne/ Australia | Pm sent John thanks for the chance |
|
| |
|
Elite Veteran
Posts: 990
| I need a power steering pump for my '58 Plymouth.
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Rob - 2016-07-16 6:46 PM
I need a power steering pump for my '58 Plymouth.
Hi Rob,
I checked for the pump, but it looks like I currently have none.
---John |
|
| |
|
Elite Veteran
Posts: 854
| John ,Do you have any clean Gas tanks for a 1957 Dodge ? Thanks |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | 57DODGECONV - 2016-07-22 10:12 PM
John ,Do you have any clean Gas tanks for a 1957 Dodge ? Thanks
PM sent. |
|
| |
|
Member
Posts: 32
| Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check. |
|
| |
|
Expert 5K+
Posts: 8446
Location: Perth Australia | Looks like Big M is under new management, pictures of the old and new owners below 
 (13876497_10210807655014007_3602071818405824357_n.jpg)
Attachments
----------------
13876497_10210807655014007_3602071818405824357_n.jpg (109KB - 560 downloads)
|
|
| |
|
Elite Veteran
Posts: 854
| I have met the Guy on the left but not the one on the right . |
|
| |
|
Member
Posts: 32
| What I need: Complete windshield trim(outside), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim |
|
| |
|
Member
Posts: 32
| big m - 2016-07-29 10:27 AM
wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check.
What I need: Complete windshield trim(outside), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | Hey John!
Would you have any of these rear roller track parts in good shape for 1957 or 1958 (?) hardtop coupe quarter windows?
Identified as No. 46 here on the attached pic.
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=62718&...
 (1608821_10151950268186938_1105390513_n.jpg)
Attachments
----------------
1608821_10151950268186938_1105390513_n.jpg (139KB - 578 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California |
Hi David,
I checked all the '57-8 hardtops I have, but these guides have all been removed, except for one that is so rusty it is probably not salvageable. '59's use a small track rather than a guide, so that won't help either.
---John |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | wim 59dodge - 2016-08-03 11:19 AM
big m - 2016-07-29 10:27 AM
wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check.
What I need: Complete windshield trim (outside ), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim
I have a full set of hardtop windshield trim, also the two long lower quarter panel moldings for a coupe. One has a dent, but it is repairable.
---John |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | big m - 2016-08-09 5:48 PM
Hi David,
I checked all the '57-8 hardtops I have, but these guides have all been removed, except for one that is so rusty it is probably not salvageable. '59's use a small track rather than a guide, so that won't help either.
---John
ok, thanks for looking!
|
|
| |
|
Location: Rindge, NH | Needed for my 1956 Dodge Custom Royal D500 (315 Hemi, 2x4bbl):
1. RH Exhaust Manifold
2. Kingpins
3. Transmission Mount |
|
| |
|
Member
Posts: 32
| big m - 2016-08-09 5:50 PM
wim 59dodge - 2016-08-03 11:19 AM
big m - 2016-07-29 10:27 AM
wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check.
What I need: Complete windshield trim (outside ), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim
I have a full set of hardtop windshield trim, also the two long lower quarter panel moldings for a coupe. One has a dent, but it is repairable.
---John
Hi John, sent you an email.
Wim |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | wim 59dodge - 2016-08-11 11:59 PM
big m - 2016-08-09 5:50 PM
wim 59dodge - 2016-08-03 11:19 AM
big m - 2016-07-29 10:27 AM
wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check.
What I need: Complete windshield trim (outside ), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim
I have a full set of hardtop windshield trim, also the two long lower quarter panel moldings for a coupe. One has a dent, but it is repairable.
---John
Hi John, sent you an email.
Wim
Wim, I haven't gotten your e-mail, are you sure you used the right e-mail address, bigmauto@colusanet.com?
---John |
|
| |
|
Member
Posts: 32
| big m - 2016-08-15 11:46 AM
wim 59dodge - 2016-08-11 11:59 PM
big m - 2016-08-09 5:50 PM
wim 59dodge - 2016-08-03 11:19 AM
big m - 2016-07-29 10:27 AM
wim 59dodge - 2016-07-28 1:23 PM
Hi, do you still have parts for a 59 dodge coronet ht?? I need some moldings and trim...
Thanks Wim
Let me know what you need, and I'll check.
What I need: Complete windshield trim (outside ), wheel well opening trim RH, and if you have... the mouldings that are fitted on the doors and the quarter panel. And last but not least... the eyebrows that are fitted in front of the fenders.
I am happy with every piece you have.
Wim
I have a full set of hardtop windshield trim, also the two long lower quarter panel moldings for a coupe. One has a dent, but it is repairable.
---John
Hi John, sent you an email.
Wim
Wim, I haven't gotten your e-mail, are you sure you used the right e-mail address, bigmauto@colusanet.com?
---John
Hmmmm, forgot the "auto" after bigm, send again
Wim |
|
| |
|
Member
Posts: 45
Location: Vacaville,Ca or Harbor springs,Mi | Holy cow ill have to come visit soon, must have been hot this summer. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Chrysler Power - 2016-09-07 11:53 AM
Holy cow ill have to come visit soon, must have been hot this summer.
Luke, the pig roast will be October first, Hope you can make it!
Definitely was a hot summer, plenty of days over 100 degrees, and a number over 110. The cooler weather will be nice!
---John |
|
| |
|
Member
Posts: 45
Location: Vacaville,Ca or Harbor springs,Mi | Sounds good, I should be up in a week or two though. |
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Chrysler Power - 2016-09-07 5:43 PM
Sounds good, I should be up in a week or two though.
Look forward to seeing you! |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | John, would you have a good 57-59 Plymouth gas pedal?
I also need good rear quarter window tracks for 57-59 Plymouth or dodge hardtop coupe like on that photo:
Edited by soiouz 2016-09-28 9:58 PM
 (image.jpg)
Attachments
----------------
image.jpg (69KB - 539 downloads)
|
|
| |
|
Expert 5K+
Posts: 7825
Location: Williams California | Hi David, I do have a good gas pedal assembly, but not the rear window guides, unfortunately.
---John |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | big m - 2016-09-29 11:08 AM
Hi David, I do have a good gas pedal assembly, but not the rear window guides, unfortunately.
---John
PM sent!
Thanks! |
|
| |
|
Expert
Posts: 3490
Location: Montreal, Canada | big m - 2016-09-29 11:08 AM
Hi David, I do have a good gas pedal assembly, but not the rear window guides, unfortunately.
---John
Got it yesterday, John! It's very nice, and I'm happy! Thanks! |
|
| |
Parting over 40 FL cars
