The Forward Look Network | ||
| ||
Parting over 40 FL cars Jump to page : < 1 2 3 4 5 6 7 8 ... > Now viewing page 3 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Mike, check your PM's. ---John | ||
bad58mike |
| ||
Elite Veteran Posts: 1150 Location: Southern California | thanks John i did and yes I'll take em! | ||
Sportsman58 |
| ||
Member Posts: 27 Location: Cape Cod, Ma. | Would you have exterior upper rear window stainless trim(or any trim) for a 58 Desoto Sportsman 4-door? I'm also looking for stone guards and a rear door stop. Thank you, Rich | ||
luvmopars |
| ||
Member Posts: 6 | John, I am looking for the following 1959 New Yorker stainless trim. I need one rocker molding and the driver's side front piece for the rear wheel opening. Looking for pieces without holes, small dings OK. Dennis | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Just got in a '56 Dodge Custom Royal 4-door sedan. Good solid body, Power windows and seat, lots of good parts. ---John | ||
narleycharlie |
| ||
Expert Posts: 1812 Location: Slidell La. | John , you ever get or have any now , 1970 300 . I need tail light lenses and lower rocker trim pieces front to rear oh and front parking lenses . NC | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Charlie, the newest 300 I have had here is a '68. I will keep an eye out for a '70, who knows, one may turn up shortly! ---John | ||
dave58 |
| ||
Veteran Posts: 193 Location: Los Lunas, NM | Hi John, My 58 Royal sedan tangled with a Dodge dually, and naturally lost. I am in need of a left front fender and the front bumper. I wonder what you might have, let me know. Thanks, Dave | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Dave, sorry to hear about your run in with the dually! I have a good rust free left fender on a '58 Coronet, as well as a good presentable front bumper, decent plating, but the lower edge has some bumper jack damage. Please PM or e-mail me if you are still needing these parts. Thanks, John | ||
dave58 |
| ||
Veteran Posts: 193 Location: Los Lunas, NM | Thanks for responding, John. Any chance you could email pics of the fender and bumper to me? I'll PM my email address. Thanks again, Dave | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Will do, Dave. ---John | ||
FURY |
| ||
Elite Veteran Posts: 1049 Location: Auckland, New Zealand. | Hi. We are travelling to USA for Tulsa next year, and I was wondering if we could stop by and look at your yard? Glenn. 57 Fury, New Zealand. | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Glenn, I too will be going to Tulsa for the big unveiling. Are you going to be in the states for some time? I do welcome visitors and photographers to spend time and browse the yard. Let me know which dates you will be here, and it will give me a better idea. Thanks, John | ||
56 Cruiser |
| ||
Extreme Veteran Posts: 329 Location: Claremore, Okla. | John I'm looking for the 2 outer chrome parts for lower part of 56 ply hood - my center is good. Ron | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Ron, I'll take a look for you. I won't be able to get back to you until after Christmas. ---John | ||
JBLKEN |
| ||
Regular Posts: 64 | John- I read most all the postings to your original add and see yoiu have a 56 (or 55 ply and or dodge) I have a need for a two door body shell (no - engine,interior, glass , motor, running gear/suspension, trunk lid, doors etc.). Just good solid floor pan from fire wall to rear valance (for a rusted out 56 Ply convert that I'm thinking of putting together - if my health holds out at 691/2 years old!) I have a lot of 62 Chrysler parts (doors, bumpers, radiators, drive shafts, rear ends, complete, low milage, subframe with it's suspension, and smaller 62 stuff) that I can offer yuou to help you fill requests. Regards; KEN WILSON, San Jose, Calif (408)227-1837 Happy Holidays | ||
falcona64 |
| ||
Member Posts: 14 | Anyone have parts for a 56 Dodge Suburban? I need the following: Tail gate hinges. Fuel tank Thanks! -Angelo | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | falcona64 - 2006-12-26 3:21 PM Anyone have parts for a 56 Dodge Suburban? I need the following: Tail gate hinges. Fuel tank Thanks! -Angelo Howdy Angelo, looks like I have a good set of tailgate hinges here, but no fuel tank. Please e-mail or PM me if you still need the hinges. ---John | ||
LittleBelvedere |
| ||
Regular Posts: 68 Location: Berthoud, CO 80513 | John: I am need of the interior trim for the front doors of a 1957 4 door Belvedere (the pieces that are < shaped that go over and under the arm rests). I need the trim for both left and right doors. I would be glad to take the door panels as well if the trim is still mounted to them. thanks, Tom | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Tom, I do have a pair of those that appear to be in good condition, for the Belvedere 4-door sedan. ---John | ||
royalbopper |
| ||
Regular Posts: 75 Location: SWEDEN (Town of strängnäs) | Hi John! I am looking for a 1956 dodge horn ring ( or a complete steering wheel) . is there any chance that you have one? also looking for a rear ashtray for a 1956 dodge 2 door hardtop (in armrest) Thanks sigge! | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Howdy Sigge, The steering wheels I have are both missing chunks of plastic, and would need to be re-cast. I do have a power steering horn ring, there is some light pitting on the chrome, but it is still presentable. Let me know if you are still needing it. I didn't have any luck on the rear armrest for a hardtop. ---John | ||
royalbopper |
| ||
Regular Posts: 75 Location: SWEDEN (Town of strängnäs) | Hi john! Yes i absolutly need the horn ring! All mine are broken or missing sigge! | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Sigge, I sent you an e-mail along with a picture to give you a better idea on the condition. ---John | ||
LittleBelvedere |
| ||
Regular Posts: 68 Location: Berthoud, CO 80513 | John: Thank you for replying. I will contact you via email. Tom | ||
phins |
| ||
Elite Veteran Posts: 1172 Location: bradenton florida | where in florida are these cars located? i'd like to stop over someday | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | The cars are all located near Sacramento, California. The FL is just an abreviation for Forward Look, not Florida. ---John | ||
BrianD |
| ||
Regular Posts: 78 Location: Orland Ca | Hey John, Brian from Golden Age in Orland here...still looking for convert bows 57-59 desoto or chrysler and another 59 desoto or chrysler 2dr parts car. Thanks | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Brian, from what research I have done, the convertible top assembly fits all '57-'59 Mopar. Unfortunately, I too am needing some of these pieces for a '59 Sport Fury I have acquired. My leads have all seemingly gone south, but am checking with a member here in Sweden, that may have info on repop header bows made in Scandinavia. If I find anything out on this, or find a barn full of convertible racks, I'll let you know! ---John | ||
polara500 |
| ||
New User Posts: 2 Location: newcarlisle ohio | hello BIG M steve here Ive got a 1962 dodge polara 500 Im missing my sill plates . Ive been told that 62 t0 65 2dr s are all the same ? as long as there B bodys? They dont have to be perfect . If you can help me let me know price . thanks steve | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Hi Steve, unfortunately what Mopars I have in those years are primarily 4-door models. No luck at this time. ---John | ||
falcona64 |
| ||
Member Posts: 14 | Got any tailgate hinges? or good fuel tanks? | ||
TASKFORCERANGER506 |
| ||
Member Posts: 8 | Mr M... Do you have any parts for the 1957 - 58 Plymouths? [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1294.jpg[/IMG] [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1292.jpg[/IMG] [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1294.jpg[/IMG] I'd be grateful. I just got back from IRAQ and decided to buy and restore my Grandfathers old car he bought new in 1957. Look forward to hearing back soon and maybe some pictures could be sent my way if you have time from your busy schedule. Edited by TASKFORCERANGER506 2007-02-23 2:18 AM | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | TASKFORCERANGER506 - 2007-02-22 11:17 PM Mr M... Do you have any parts for the 1957 - 58 Plymouths? [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1294.jpg[/IMG] [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1292.jpg[/IMG] [IMG]http://i112.photobucket.com/albums/n175/TASKFORCERANGER506/100_1294.jpg[/IMG] I'd be grateful. I just got back from IRAQ and decided to buy and restore my Grandfathers old car he bought new in 1957. Look forward to hearing back soon and maybe some pictures could be sent my way if you have time from your busy schedule. Howdy! I have lots of parts for the '57 Plymouths, including rust-free fenders, moldings, interior components, and mechanical items. Please e-mail or PM a list to me, and I will check to see what I have. ---John | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | falcona64 - 2007-02-22 4:25 PM Got any tailgate hinges? or good fuel tanks? No dice on the fuel tank. The one that remains has a visible rust hole in the bottom. I do have a good set of tailgate hinges, PM me if you are still needing them. ---John | ||
wbower3 |
| ||
Walter passed away on Jul 29, 2014. We will miss you, Walt! Posts: 5358 Location: Heaven Above (Formerly Oklahoma City,OK) | Hello John at BigM, In reveiwing your Parts for sale, I see you are prompt to reply to inquiries. I need some parts for a '55 Dodge Royal Lancer 2door. Hood name plate (dodge) , the Royal Lancer script on the sides of the two front fenders, the horns and brackets, and the two sill plates for the doors. If you have some or all please email me at wbower3@yahoo.com, thanks, or PM me . | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | I'll check to see what I have, and get back to you shortly. ---John | ||
Nathan D. Manning |
| ||
Got any STEERING WHEELS for the following: 1956 Chrysler Windsor 1960 Chrysler New Yorker ??? Thanks, -NM | |||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Nathan, I'll check to see what I have, although I have my doubts on good condition wheels. The heat and sun out here tends to make the plastic disintegrate. ---John | ||
antonellomopar |
| ||
Extreme Veteran Posts: 375 Location: milano, italy | Hello John still waiting to have a reply on the 56 Fireflite parts. In the meantime, would also need a radiator from a 57 or so Imperial or New Yorker, complete with shroud. Thank you Antonello | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Antonello, I'm still checking on a few items. I''l look for the radiator and shroud at the same time. ---John | ||
TASKFORCERANGER506 |
| ||
Member Posts: 8 | Big M... I'd like to know your price for a front right and left fender for my 57 Plymouth? Also need a rear seat cushion frame, front bumper, Thanks. | ||
72sst |
| ||
Extreme Veteran Posts: 327 Location: Orefield,Pennsylvania | John, Do you have any 62 chrysler 300 hub caps or 68 new yorker hub caps with the red center? Thanks, Eric Edited by 72sst 2007-03-18 1:56 PM | ||
carjock |
| ||
Account Inactive by Request Posts: 1601 | John: Any full-size '60 Dodges in your holdings? I need several items, but am really after a dash clock. | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Jim, wish I could help you there, but the '60 Dodges I currently have are not the senior series. That clock is an ultra tough item to find, but well worth it when you do find one. Your new Matador looks like a nice car! ---John | ||
carjock |
| ||
Account Inactive by Request Posts: 1601 | John: I need a driver's side fender for my '60 Matador. They are identical to the fenders used on the junior Dodges (Phoenix, Pioneer, Seneca) and if you have any of those cars around, maybe you can help? Let me know what you have. Thanks. | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Jim, I do have a couple of the junior series cars, I will check it out and let you know. ---John | ||
big m |
| ||
Expert 5K+ Posts: 7807 Location: Williams California | Jim, check your PMs. I do have a nice left fender. ---John | ||
59 SportSub |
| ||
Member Posts: 32 Location: Whitewater, Ca | Hey John, Dave here, I was up there back in August getting a tailgate for my '59 Sport Suburban. I'm going to be up in your neck of the woods April 13-15. I would love to stop by to pick up some more parts. Could you email me so I can let you know what I need? Thanks much, Dave | ||
Flamin.J |
| ||
Regular Posts: 55 | Hi there, I was wondering if you would have a green tinted windshield for a 1960 polara thanks J | ||
Jump to page : < 1 2 3 4 5 6 7 8 ... > Now viewing page 3 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |