The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Front Bumper
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
60 Windsor
Posted 2015-07-31 9:47 PM (#485796)
Subject: Front Bumper


Member

Posts: 41
25
Location: South Central PA		Getting ready to put the front end back together on my 60 Windsor. I noticed when I pulled it off that the bumper was off from the left side to the right side (sticks out a little further on the left than the right). I measured the sub frame and it is 1/16"-1/8" out further on the left side from the right side measurements. I don't see a way to move the sub frame forward or aft at all and was wondering if I can shim out the bumper to make it straighter? Any assistance would be appreciated. Thanks.
Top of the page Bottom of the page
Shep
Posted 2015-08-01 9:13 PM (#485858 - in reply to #485796)
Subject: Re: Front Bumper



Expert

Posts: 3398
20001000100100100252525
Location: Chestertown, NY ( near Lake George)		Sure shim to fit, more than Mopar did back then.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)