|
|
Extreme Veteran
Posts: 347
 
Location: Ocean Park, Washington | Thanks for the pics. I wondered how you would fit. I love the two-tone. Not crazy about orange but it really works with the black. Does it have a name? |
|
| |
|
Veteran
Posts: 146
Location: California | floyd066 - 2015-09-25 9:53 PM
Thanks for the pics. I wondered how you would fit. I love the two-tone. Not crazy about orange but it really works with the black. Does it have a name?
No haven't named it, my niece said I should call it "The Ernie" after my dad, but that just doesn't work. Very tight squeeze getting into the truck. You probably saw that the moved the firewall back 3" to accommodate the hemi. That much less leg room in an already small cab. |
|
| |
|
Extreme Veteran
Posts: 347
Location: Ocean Park, Washington | That sucks. Maybe cut off your feet and push the pedals with your nubs. |
|
| |
|
Extreme Veteran
Posts: 404
Location: upstate new york | Just stumbled upon this post...are parts still available?
Thanks,
billy |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Billy,
Yes down to 30 mostly complete cars, but did get all the best stuff off the other 50 cars. Let me know what you need.
Regards,
Gary |
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | I also just found this post. I need a 59 Dodge Coronet trunk lid, a 59 Dodge Coronet front left grille center bar(?) I don't know what to call it, but it is the chrome piece in the middle of the grille. There is one on each side of the grille...it has the parking light in it.
also need a set of the chrome letters "CROWN" for a 1960 Chrysler Imperial Crown. Just need one set for one door.
Edited by 69coronet 2015-12-20 5:07 PM
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi.. a couple of questions. Are you looking for the complete driver side grill bar assembly with parking light pod? Also I'm pretty sure 60 Imperials take the small gold letters that spell out CROWN and they do on the front fender, not the door. Just want to make sure we're talking about the same parts.
Regards,
Gary
 (1959 Dodge Custom Royal.jpg)
 (1959 Dodge Wagon.jpg)
 (1960 Imp 4 Dr HT.jpg)
Attachments
----------------
 1959 Dodge Custom Royal.jpg (92KB - 705 downloads)
1959 Dodge Wagon.jpg (84KB - 741 downloads)
1960 Imp 4 Dr HT.jpg (63KB - 748 downloads)
|
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | You are correct.
all I need for the 59 Dodge Coronet is the left hand side grille bar that holds the parking light assembly (and of course a good trunk lid as well.) And for the 60 Imperial the small gold CROWN letters that go on the front fender just below the script "Imperial" logo. Thanks, Ron |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Ron,
Sent you a PM.
Regards,
Gary
 (1959 Dodge Deck Lid.jpg)
 (1959 Dodge Deck Lid-2.jpg)
Attachments
----------------
1959 Dodge Deck Lid.jpg (123KB - 702 downloads)
1959 Dodge Deck Lid-2.jpg (124KB - 741 downloads)
|
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | PM and email sent Thanks Ron |
|
| |
|
Expert 5K+
Posts: 6555
  
Location: Newark, Texas (Fort Worth) | Still waiting for the shipping price on the door panels. Gary. Marc. |
|
| |
|
Veteran
Posts: 146
Location: California | mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
 (1958 Ply Door Panels11.jpg)
 (1958 Ply Door Panels12.jpg)
Attachments
----------------
1958 Ply Door Panels11.jpg (97KB - 719 downloads)
1958 Ply Door Panels12.jpg (87KB - 726 downloads)
|
|
| |
|
Member
Posts: 25
Location: Staten Island, New York | netparts - 2015-09-07 8:21 PM
Hi,
Were you still looking for the 60 Dodge parts. Know I have a nice driver fender, would have to check on the RR door. Are you looking for hubcap clips for the 1940s early 50s wheels?
Regards,
Gary
Yes I'm still in need of these parts. My zip code is 10312. |
|
| |
|
Expert
Posts: 1497
Location: Fairfax, Minnesota | Hi, I have been trying to find this part for a while. I have a 61 Chrysler Newport 2dr ht (Canadian Windsor) and need the rear seat carpet trim piece that connects to the rear of the sill plate. Some forum members have speculated that a 61 or 62 donor car will work. I am looking specifically for the drivers side, but will purchase both if you have them. See images- 2nd image is actually passenger side, but it shows where the part resides.
Edited by Ray 2015-12-28 9:26 PM
 (sill part.jpg)
 (missing driver side.jpg)
Attachments
----------------
sill part.jpg (206KB - 709 downloads)
missing driver side.jpg (100KB - 722 downloads)
|
|
| |
|
Expert 5K+
Posts: 6555
Location: Newark, Texas (Fort Worth) | netparts - 2015-12-25 12:02 PM
mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th ) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
Thanks Gary! Marc. |
|
| |
|
Expert
Posts: 1223
Location: Ramona, CA | Hi Gary,
Looking for a pair of rear stone guards for a '60 Chrysler. Might be the same as Desoto and '61 as well. Not sure. Here is a picture of the right side, missing the left one and could get this one fixed but a pair of good ones would be nice.
Also looking for rear quarter spear moldings (pot metal) for 1964 New Yorker Town & Country wagon.
Thanks, Nick.
Edited by NicksGarage 2015-12-29 11:11 PM
 (stone_guard.jpg)
Attachments
----------------
stone_guard.jpg (48KB - 706 downloads)
|
|
| |
|
Veteran
Posts: 155
Location: Hellertown, PA | Hello
I am looking for a 1959 Custom royal, for the junction moldings between the headlight eyebrow and the front fender wheel well molding, for both sides
Gilles in PA
gillesbeneyton@aol.com |
|
| |
|
Expert 5K+
Posts: 6555
Location: Newark, Texas (Fort Worth) | mstrug - 2015-12-29 4:17 AM
netparts - 2015-12-25 12:02 PM
mstrug - 2015-12-24 7:46 AM
Still waiting for the shipping price on the door panels. Gary. Marc.
Hi Marc,
Haven't forgot you. As soon as the stress level goes down in the Grossich household, (Christmas and my wifes Birthday on the 26th ) we'll figure out a way to box those door panels properly and get you a total. In the meantime, here's couple of pics of them.
Merry Christmas,
Gary
Thanks Gary! Marc.
How much is shipping? Thanks Marc. |
|
| |
|
Elite Veteran
Posts: 827
Location: tailFinland | Hi Gary!
Need these trim pieces from any 1960-1964 2d Ht Mopar (stainless)
also same carpet trim pieces as Ray needs 
Edited by Adventurer 60 2016-02-28 5:04 AM
 (interior.jpg)
Attachments
----------------
interior.jpg (97KB - 722 downloads)
|
|
| |
|
Veteran
Posts: 211
Location: Suwanee, GA | Hi Gary,
I'm looking for the LH and RH wheel opening trim circled in the photo. I do not need splash guards. Part numbers are 2196180 and 2196181. They were used on 60-61 Plymouth Fury Suburban and 62 Chrysler wagon only. Can you help?
Thanks,
Robert
Edited by Ev's62Chrysler 2016-02-28 8:59 AM
 (wheel opening trim.png)
Attachments
----------------
wheel opening trim.png (191KB - 690 downloads)
|
|
| |
|
Veteran
Posts: 146
Location: California | Hi Robert,
I've got a 62 Chrysler wagon for parts, but mine's a Windsor and doesn't use wheel lip mouldings. That moulding is going to be real tough to find, but I'm sure you already know that.
Regards,
Gary |
|
| |
|
Member
Posts: 48
| Front bumper for a 55-56 Dodge Coronet? Jerry. 760-417-2654 |
|
| |
|
Member
Posts: 18
| hey mate do you have much for 2 door firedome cheers |
|
| |
|
Veteran
Posts: 146
Location: California | What year Firedome? |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Jerry,
Should be able to help out on the Dodge bumper. I'll give you a call or you can call me @ 951 662-2868.
Thanks,
Gary
 (1955 Dodge CRL 2 Dr HT.jpg)
 (1956 Dodge CR 4 Dr Sedan Gold:Wht.jpg)
 (1955 Dodge 2 Dr HT.jpg)
 (1955 Dodge 4 Dr.jpg)
Attachments
----------------
1955 Dodge CRL 2 Dr HT.jpg (82KB - 660 downloads)
1956 Dodge CR 4 Dr Sedan Gold:Wht.jpg (88KB - 634 downloads)
1955 Dodge 2 Dr HT.jpg (87KB - 650 downloads)
1955 Dodge 4 Dr.jpg (87KB - 645 downloads)
|
|
| |
|
Member
Posts: 18
| hey mate do you have much stuff left for 2 door 59 firedome need some interior parts plus windscreen trims thanks |
|
| |
|
Veteran
Posts: 259
Location: Hinnerup, Jylland (Jutland), Denmark | Hi Gary !
I have seen your photos, you have 2 1958 Windsor's a 2 dr. ht. and a 4 dr. sd. both of them cut up for parts,
what is your price for the remains ? and how soon do you need it to be pick up, if sold ?
Torben
"58WindsorDarltline"
P.S. I just realised that it was on page 1, do you still have them ??
Edited by 58WindsorDartline 2016-09-29 2:08 AM
|
|
| |
|
Member
Posts: 24
Location: belgium | Hello, looking for 58 plymouth center horn silver with power steering letters. Trunk letters, heater box in good condition model 705. Ship to belgium? |
|
| |
|
Regular
Posts: 86
| I am looking for a few 1958 Desoto Fireflite 4 door bits. Hope to find at least "C" or grade 3, "good" condition, servicable overhaul-able parts. Willing to pay fair prices for higher grade of course, but I am within a certain budget, and my girl insists on new fat whitewalls. ISO:
rear window crank handle, front sillplates(may buy new), turn signal switch, and turn switch arm, set of 6 tailights(one broken out, hope to use best of what I can find), rear center bumper, and a left "tree" or chrome triangle above exhaust tip inside of fin surrounding tailights.
These parts are broken or missing, so needed, and hopefully found within next few months for reinstall after rust abatement and fresh paint. |
|
| |
|
Board Moderator & Exner Expert 10K+
Location: .Norfolk..Mafia.. ,England UK | DieselJeep - 2016-10-22 3:56 AM
I am looking for a few 1958 Desoto Fireflite 4 door bits. Hope to find at least "C" or grade 3, "good" condition, servicable overhaul-able parts. Willing to pay fair prices for higher grade of course, but I am within a certain budget, and my girl insists on new fat whitewalls. ISO:
rear window crank handle, front sillplates(may buy new), turn signal switch, and turn switch arm, set of 6 tailights(one broken out, hope to use best of what I can find), rear center bumper, and a left "tree" or chrome triangle above exhaust tip inside of fin surrounding tailights.
These parts are broken or missing, so needed, and hopefully found within next few months for reinstall after rust abatement and fresh paint.
Also give John a shout on this thread mate, Many members here from around the world buy from John (BigM)
http://forwardlook.net/forums/forums/thread-view.asp?tid=6355&start...
. |
|
| |
|
Member
Posts: 18
| hey there do you have any parts for 1959 desoto |
|
| |
|
Member
Posts: 18
| 1959 thanks |
|
| |
|
Member
Posts: 28
Location: Edmonton AB Canada | Hello,
I am looking for the left rear lower quarter side trim for a 59 Sierra wagon. Maybe I might take a spare tire access panel if you have a rust free one that would be better than mine.
I also need the hood side trim, both sides, for a 61 Dodge pick up.
Thank you, Ed |
|
| |
|
New User
Posts: 2
Location: North Carolina | first off sorry for your loss,
second would you happen to have any parts for a 60 fury? 4 door sedan |
|
| |
|
Veteran
Posts: 225
| Hi Gary
PM sent |
|
| |
|
Member
Posts: 44
| Any 57/58 Plymouths? |
|
| |
|
Member
Posts: 27
| Looking for 8 window crank handle escutceons (washers) for my 4 door 59 plymouth.It my also be the same from other forward look cars. 2" o.d. 1/2" center hole made of metal. Thanks Mark |
|
| |
|
Member
Posts: 7
| Looking for the stainless steel rear fender ribbing "also known as sharks grill" for a 1960 Dodge Matador. They were also for a 60 Polara.
Regards,
Gene |
|
| |
|
Veteran
Posts: 146
Location: California | Hi,
What 59 Desoto parts do you need? Have parted out several over the years.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Hi Gene,
Used to have several NOS for one side. Sold them all years ago and haven't had any since. Do have some 60 Dodge stuff. Let me know if you're looking for anything else.
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Veteran
Posts: 146
Location: California | Mikeb - 2017-04-07 12:06 AM
Any 57/58 Plymouths?
No complete ones, but do have alot of parts.
Regards,
Gary |
|
| |
|
Member
Posts: 11
| I have a 1960 Chrysler Windsor and am looking for the side trim pieces that are at the tail end of the side trim pieces that are 90 degrees and connect the top side trim to the one underneath it. Do you have anything?
Thanks, Jon
Edited by jcwer 2017-05-07 3:40 PM
 (60 winsdor side trim.jpg)
Attachments
----------------
60 winsdor side trim.jpg (89KB - 609 downloads)
|
|
| |
|
New User
Posts: 2
| Hi
I'm in need of 58 Plymouth diamond pattern aluminium dash and push button trans plates
Also for my Plodge I need a good left front fender 58 Dodge Coronet
Do you have these? |
|
| |
|
Member
Posts: 11
| Hi
I am looking for a bench seat for a 1960 desoto 4 door |
|
| |
|
Member
Posts: 18
Location: Knoxville, TN | Gary,
I just sent you a PM. Thanks,
Ken |
|
| |
|
Expert
Posts: 2007
Location: Branson, MO | Got any '60 Polara or Matador parts? Body including floors, exterior trim, and interior in particular. |
|
| |
|
Member
Posts: 44
| Do you have any 57 or 58 Plymouth 2dr hdtp's. I need roof trim and any factory a/C parts. Also looking for power window regulators, motors and wiring.
Mike B |
|
| |
|
Veteran
Posts: 298
Location: Nashville, TN | I'm still looking for a 59 Dodge Coronet drivers side front parking ight chrome bar. Do you have one? |
|
| |
Losing storage... 80 plus MOPAR cars for parts or complete
