The Forward Look Network | ||
| ||
Losing storage... 80 plus MOPAR cars for parts or complete Jump to page : 1 2 3 4 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
netparts |
| ||
Veteran Posts: 146 Location: California | Losing storage... 80 plus MOPAR cars for parts or complete. Losing storage and will be downsizing 80 plus MOPAR cars. The oldest is 1949 and the newest is 1966, with plenty of 55 thru 61 finned MOPARS. These are mostly parts cars with California rust free sheet metal and plenty of good useable parts. Cars are located in Colton, near San Bernardino, about 1 hour east of LA. In the next 2 to 3 months I will be downsizing to a smaller yard holding about 25 to 30 cars and the rest will end up being parted out, sold as complete units, or eventually scrapped. I also have a large 45 year inventory of 1929 thru 1975 NOS and nice used MOPAR parts that I will continue to sell at our shop. Please e-mail with specific parts requests. For further info best to e-mail grossich@roadrunner.com or call Bob at the shop, Mon. thru Weds. 9 to 4 @(909)825-1231, or Gary @ (951) 662-2868. OK MOPAR FRIENDS.... Hopefully the 3rd time is the charm!! Been slowly reducing our cars over the past 5 or 6 years from over 200 to about 80. Almost all are parts cars, but there are a few 2 door hardtop bodies. I was reading previous Forwardlook posts from several years back when we had the 200 cars and saw some people were upset that my dad or I didn't get back with them. My sincere apologies to those my father or I didn't get back with previously when we were under the gun to find new storage. As some of you who know me are aware, I don't do this for a living, it's a hobby and my personal passion that got out of control! I own a pizza restaurant as a real full time job, so I'm not always the fastest at getting back to people and my dad tended to forget. Anyway, with the passing of my dad and faced with the loss of yet another storage yard, it's time to thin the herd. I have a complete list of cars and at least one 3/4 picture of each. Please help me to help you with your requests by giving me a SPECIFIC LIST of what you need. I will do the best I can to get back with you in a timely manner. Special thanks to all my MOPAR friends for their condolences regarding the passing of my dad. Gary Grossich (S Colton Cars5.jpg) Attachments ---------------- S Colton Cars5.jpg (55KB - 956 downloads) | ||
56300B |
| ||
Extreme Veteran Posts: 480 Location: The Great Northwest | Gary, I would be interested in any options available for a 1961 New Yorker. Sometimes 60 or 62 will work as well. Regards, Arland | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hey Arland, Have about ten 1960-62 Chryslers, including a 61 New Yorker 4 door HT, but I need to know specifically which options you're looking for. Thanks, Gary | ||
56300B |
| ||
Extreme Veteran Posts: 480 Location: The Great Northwest | PM Sent | ||
SENIX |
| ||
Veteran Posts: 281 Location: CEMENT CITY MICH. | Do you have any 1960 Valiant top front fender trim? Swanny | ||
Mike McCandless |
| ||
Expert Posts: 1886 | I need a front clip for a 57-58-59 Chrysler 300 letter car. | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Mike, Sorry, can't help you on that, but I do have an NOS 57-58 300 decklid with correct holes for the 300 emblem. Gary | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Swanny, Are you talking about front fender top "spears" I don't think I have any of those in my inventory. Gary | ||
56300B |
| ||
Extreme Veteran Posts: 480 Location: The Great Northwest | Gary, Did you receive my PM with the parts list? Arland | ||
ronbo97 |
| ||
Expert Posts: 4110 Location: Connecticut | Gary, Check your inbox. Thanks, Ron | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Ron, Didn't see anything from you. Can you e-mail me again? Thanks, Gary | ||
ronbo97 |
| ||
Expert Posts: 4110 Location: Connecticut | Gary - I sent you a PM. Go to the top of this page. Click on 'inbox'. It should be there. Let me know if you still can't see it. Thanks, Ron | ||
mstrug |
| ||
Expert 5K+ Posts: 6555 Location: Newark, Texas (Fort Worth) | How much do you want for all of it? Marc. | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Ron, Didn't know that feature existed. No wonder why some people said I never got back to them several years ago when I posted the cars, I never saw their PM's!! Thanks for the help and advice. Gary Attachments ---------------- South Colton Cars By Make & Year.numbers (79KB - 837 downloads) | ||
scooter0910 |
| ||
Veteran Posts: 157 Location: bountiful, Utah | Gary, I just sent you a PM. I met your Dad a long time ago at Pomona. He invited me over to his home and showed me his amazing collection. I will always remember his kindness. I will miss him! Scott Spencer | ||
bel5758 |
| ||
Elite Veteran Posts: 716 | Gary I've sent you an email directly for some stuff for a 58 Ply Bel coupe. No hurries and thanks. | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Scott, Thanks, my dad was always such a giving person. He LOVED showing people his stuff and giving them tours of the shop. He came from an era before money really became involved in the hobby, back in the day when another car guy would stop by needing something and you'd just give it to them, and figure if you needed something in the future they'd do the same for you! As a teenager he told me "old cars are good therapy" and I never forgot his advice!! As the years went by and we accumulated cars and inventory, along with shop employees and other overhead, we had to start charging the "going rate" for things. I eventually started selling on e-bay (DPCDFAN)and let the buyers determine the market price for parts, as I always enjoyed buying way more than selling. Anyway, thanks again for the kind words about my dad!! | ||
ttotired |
| ||
Expert 5K+ Posts: 8445 Location: Perth Australia | Thanks for the reply I dont think theres much on the dodges for me (interior and very good bling) | ||
ToMopar |
| ||
Elite Veteran Posts: 1177 Location: D-70199 Heslach | Hi Gary, I got one of your last downsizing in 2007/2008, the car is still in restoration. Sad that you have to downsize again. The list from 2007/2008 is here http://www.forwardlook.net/forums/forums/thread-view.asp?tid=13845 but no idea, which car's you still have. Good luck ToM by the way, I am looking for a 57/58 DeSoto/Chrysler Flite/NY 2drht | ||
firedome |
| ||
Expert Posts: 3156 Location: NY & VT | Hey Gary! Sent a PM to you! Roger in NY | ||
Cmangeot |
| ||
Extreme Veteran Posts: 531 Location: Park Hills, KY | Gary, I sent you a PM about needed items for my 60 Windsor. Thanks in advance!!!! | ||
realgone58 |
| ||
Elite Veteran Posts: 1111 Location: Ocala, Florida | Gary, PM sent for '58 and '61 Plymouth stuff. | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Jari, Sorry, can't help on the 61 parts. On the 57 Desoto dual headlight parts, what exactly are you looking for? The inside part that holds the bulbs, the cast piece the headlight bulbs go thru, the outer pot metal trim rings, or the entire assembly? Regards, Gary (1957 Des F:Flite.jpg) Attachments ---------------- 1957 Des F:Flite.jpg (89KB - 835 downloads) | ||
Cmangeot |
| ||
Extreme Veteran Posts: 531 Location: Park Hills, KY | Gary, Do you have any photos of your 1960 chryslers?? I left you a message. Thanks in advance! | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hey Chris, Please send me an e-mail. Thanks, Gary (1960 Chry A:C.jpg) Attachments ---------------- 1960 Chry A:C.jpg (85KB - 832 downloads) | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Tom, Here is the only 57/58 Chrysler or Desoto 2 door HT left. Regards, Gary (1958 Chry Windsor 2 Dr HT.jpg) Attachments ---------------- 1958 Chry Windsor 2 Dr HT.jpg (89KB - 865 downloads) | ||
ToMopar |
| ||
Elite Veteran Posts: 1177 Location: D-70199 Heslach | hi Gary, many thanks for the windsor picture, but little much to work for me. /ToM | ||
Adventurer 60 |
| ||
Elite Veteran Posts: 827 Location: tailFinland | netparts - 2013-09-16 9:53 AM Hi Jari, Sorry, can't help on the 61 parts. On the 57 Desoto dual headlight parts, what exactly are you looking for? The inside part that holds the bulbs, the cast piece the headlight bulbs go thru, the outer pot metal trim rings, or the entire assembly? Regards, Gary Hi Gary. I Think you got them all in this picture. I'm gonna need entire assemblies. IĀ“ll get back on saturday when I know more. Jari | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | PM sent Gary | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Here is a pic of one of the 59 Dodges (1959 Dodge CR 4 Dr Sedan.jpg) (1959 Dodge CR 4 Dr Sedan2.jpg) Attachments ---------------- 1959 Dodge CR 4 Dr Sedan.jpg (98KB - 852 downloads) 1959 Dodge CR 4 Dr Sedan2.jpg (92KB - 873 downloads) | ||
grubin |
| ||
Regular Posts: 95 Location: Lake George NY | Do you still have a 55 chrylser? Please let me know I am in the need of a few parts to complete my project | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi, I don't have a 55 Chrysler parts car, but do have 2 55 Desotos in the yard. I do have 55 Chrysler parts. If you send me a soecific list of your needs I can check it out and get back with you. Thanks, Gary (1955 Desoto 2 Dr HT.jpg) (1955 Desoto 2 Dr HT2.jpg) (1955 Desoto 4 Dr HEMI.jpg) (1955 Desoto 4 Dr HEMI2.jpg) Attachments ---------------- 1955 Desoto 2 Dr HT.jpg (95KB - 819 downloads) 1955 Desoto 2 Dr HT2.jpg (84KB - 875 downloads) 1955 Desoto 4 Dr HEMI.jpg (74KB - 776 downloads) 1955 Desoto 4 Dr HEMI2.jpg (73KB - 820 downloads) | ||
finman |
| ||
Regular Posts: 97 Location: Queens NY | Hi. Would like to know if you have a drivers side vent window assembly from a 1957-59 Dodge Plymouth, or Chrysler, hardtop | ||
whitedawg |
| ||
Extreme Veteran Posts: 314 Location: San Antonio Tx | Still chasing the rear passenger side door tirm for 60 Dodge Pioneer | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi, All 57 hardtops, except Imperial, along with 58 Plymouth hardtops have one style vent frame and 58 and 59 Hardtops,(except Imperials and 58 Plymouth) use a different style. Which car and year do you have? Thanks, Gary (1957 Chrysler Saratoga 4 Dr HT.jpg) (1958 Chrysler Windsor 4 Dr HT Wht.jpg) Attachments ---------------- 1957 Chrysler Saratoga 4 Dr HT.jpg (65KB - 904 downloads) 1958 Chrysler Windsor 4 Dr HT Wht.jpg (89KB - 886 downloads) | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Kowabunga Buffalo Bob! I'll have to check on the rear door moulding for your 60 Dodge. Can't tell from any of my pics. Regards, Gary (1960 Dodge 4 Dr.jpg) (1960 Dodge 4 Dr2.jpg) Attachments ---------------- 1960 Dodge 4 Dr.jpg (94KB - 891 downloads) 1960 Dodge 4 Dr2.jpg (90KB - 896 downloads) | ||
edk |
| ||
Member Posts: 28 Location: Edmonton AB Canada | Hello Gary, I am new to the group and have a 57 Custom Royal Lancer and need some of the side trim and emblems. I think looking at your pictures that most of yours may be gone, but thought I would ask anyway. I need the trim that goes on the roof, above the door and quarter window, both sides. Also the wider CRL trim along the lower edge of the fin, both sides. Possible the rear window trim (I am also getting a 2 dr sedan, which has most of this window trim, but I have not picked it up yet, and I am not sure if it would be the same) Also the Custom Royal script, both sides Right inner door panel, or the trim off it. D500 emblem? Rear quarter emblems? Rear wheel well rock guard moldings One bumper tooth. (right outer if it matters) I know this is a long list, and some of this stuff may be the first items gone, but if you have anything, please let me know. I think this was someone else's parts car, but I am trying to save it. Thank you, Ed. | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Ed, What body style is your car? When you say Lancer, that would make it either a convertible or either a 2 or 4 door hardtop. The only parts car I have left is a Custom Royal 4 door sedan, but I have lots of parts off of cars we parted over the years as we have restored 2 Custom Royal converts and several 2 door hardtops. Let me know which body style you have and we can go from there. My e-mail address is grossich@roadrunner.com. Thanks, Gary (1957 Dodge Custom Royal.jpg) (1957 Dodge CR 4 Dr Sedan.jpg) (1957 Dodge CR 4 Dr Sedan2.jpg) Attachments ---------------- 1957 Dodge Custom Royal.jpg (91KB - 909 downloads) 1957 Dodge CR 4 Dr Sedan.jpg (86KB - 828 downloads) 1957 Dodge CR 4 Dr Sedan2.jpg (88KB - 855 downloads) | ||
edk |
| ||
Member Posts: 28 Location: Edmonton AB Canada | Sorry for not being completly clear Gary, it is a 2 door hardtop. Thanks for the quick reply! | ||
grubin |
| ||
Regular Posts: 95 Location: Lake George NY | Parts needed for my 55 Chrysler front wheel grease caps one or both im not sure maybe the same for a 2 door 55 Desoto but looking for the rear courtesy light lens they are round front seat handle to move seat forward and back sunvisors for recovering if you can help let me know my email grubin648@yahoo.com Gary | ||
furymitch |
| ||
Regular Posts: 78 Location: Ipswich UK | Hey Gary Do you have a '59 Plymouth passenger side front fender?? Mitch | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Mitch, I don't think so, but I'll take a look. Just stripped out and scraped the only 59 parts car I had left. Still have my 59 Sport Fury convert. I've owned for the past 25 years. (1959 Ply 4 Dr.jpg) Attachments ---------------- 1959 Ply 4 Dr.jpg (108KB - 852 downloads) | ||
main-wire |
| ||
Member Posts: 49 | Hi- I need a windshield for a '57 Dodge Coronet convertible. Interchanges with 2dr HTs or other convertibles in '58 and '59 as well? Thanks. Wayne | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi Wayne, You're correct 57 thru 59 converts will interchange with 58 and 59 2 and 4 door hardtops, except 58 Plymouths. Sorry, don't have one. Best bet would be to buy a new, reproduction from Timo Taskinen ? in Riverside, Ca. Best of luck, Gary | ||
dodge59 |
| ||
Elite Veteran Posts: 1018 Location: Milwaukee Wisconsin | I notced in several pics that some of these cars had all the glass intact then others show all the glass is broken out .. Why destroy all that nice glass ? vandals? | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi, Yes, it's hard to have anything anymore. In the past 6 months kids have gotten in the yard and broken virtually every piece of glass. Very depressingā¦. | ||
dodge59 |
| ||
Elite Veteran Posts: 1018 Location: Milwaukee Wisconsin | sorry to here that netparts . john | ||
Superior Shine |
| ||
New User Posts: 4 Location: Los Angeles | Would you happen to be parting out a 61 Dart Seneca (pioneer, phoenix) ? | ||
netparts |
| ||
Veteran Posts: 146 Location: California | Hi, Sorry, don't have any 61 Dodge parts cars, but do have some NOS and used parts. Regards, Gary | ||
silvertonguedevil |
| ||
Member Posts: 37 Location: Vale, OR | I've got a '55 Coronet 2 door hardtop. Do you have any parts or cars? I can give you a list if you have anything. | ||
Jump to page : 1 2 3 4 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |