The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Dual Quad linkage and set-up
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
calvatron
Posted 2012-12-23 9:05 PM (#352286)
Subject: Dual Quad linkage and set-up



Veteran

Posts: 207
100100
I have acquired a 318 Dual Quad set-up off a 58 Fury and need help from anyone who has a complete functioning set-up to assist in the installation of mine. Since this photo I managed to find a correct Choke and heat tube. The Fuel Lines I am very proud of, I made that without seeing or knowing what the original looked like. Since seeing a pic of an original. I found out I was real Close.

58 Fury Golden Commando Dual Quad
Top of the page Bottom of the page
calvatron
Posted 2012-12-24 10:51 AM (#352345 - in reply to #352286)
Subject: RE: Dual Quad linkage and set-up



Veteran

Posts: 207
100100
Does no one else have a Dual Quad here????
Top of the page Bottom of the page
ttotired
Posted 2012-12-24 6:27 PM (#352405 - in reply to #352286)
Subject: Re: Dual Quad linkage and set-up



Expert 5K+

Posts: 8443
50002000100010010010010025
Location: Perth Australia		Got 1 but not set up either yet

Mine has edlebock carbs and I have an after market linkage and fuel line set up from summit raceing.

If you do a search for "Dual Quad" for the last year, there are a lot of threads to look at and pics showing different
linkage set ups

Top of the page Bottom of the page
rbmain
Posted 2012-12-25 2:55 AM (#352443 - in reply to #352286)
Subject: Re: Dual Quad linkage and set-up



100010010010010025
here's a couple of photos i had kicking around. (i'm on break from turkey preparation, roasting starts at 6 am.)



(Dual Quad Linkage.jpg)



(dual quads.jpg)



(DCP_3517.JPG)



(DCP_3519.JPG)



(ea63_1.JPG)



(f46f_1.JPG)



(Hal0909124531-1-006.jpg)



Attachments
----------------
Attachments Dual Quad Linkage.jpg (116KB - 92 downloads)
Attachments dual quads.jpg (97KB - 80 downloads)
Attachments DCP_3517.JPG (85KB - 78 downloads)
Attachments DCP_3519.JPG (92KB - 87 downloads)
Attachments ea63_1.JPG (28KB - 87 downloads)
Attachments f46f_1.JPG (26KB - 86 downloads)
Attachments Hal0909124531-1-006.jpg (86KB - 84 downloads)
Top of the page Bottom of the page
calvatron
Posted 2012-12-25 9:21 AM (#352456 - in reply to #352286)
Subject: RE: Dual Quad linkage and set-up



Veteran

Posts: 207
100100
In the large photo (the Silver Intake w/ springs) are those spring brackets original? does any one make them?

Do you have photos of the accelerator rod to the carbs?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)