|
|
Member
Posts: 42
![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: Louisville Ky | All I have is two holes in the front bumper which are 3" apart. They are also on the underside of the bumper. Does anyone know where I can get a bracket that will hold a standard 6" x 12" license plate? Front plates are not required in Kentucky so I am going to attach an original plate from 1955. I would rather not have to drill two new holes so any suggestions other than that would be appreciated. Does anyone have a pic of what the bracket looks like? Thanks....
Edited by Dodge55CustomRoyal 2024-06-21 12:22 PM
Attachments ----------------
IMG_1981.jpeg (82KB - 31 downloads)
IMG_1983.jpeg (73KB - 33 downloads)
IMG_1988.jpeg (117KB - 34 downloads)
|
|
|
|
![](/forums/profile/get-photo.asp?memberid=7567&type=profile&rnd=604) Exner Expert 10K+
Posts: 10136
![5000](http://forwardlook.net/forums/images/decorations/multiple/5000.gif) ![5000](http://forwardlook.net/forums/images/decorations/multiple/5000.gif) ![100](http://forwardlook.net/forums/images/decorations/multiple/100.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: Lower Mainland BC | .
I am guessing that this 56 Chevy bracket would suit your needs (my 56 Dodge bracket is WAAAAY different)
https://www.ebay.com/itm/375495034045?
My bracket and bumper bracket holes (56 Dodge):
(56DodgeFrontLicensePlateBracket_1.jpg)
(56DodgeFrontLicensePlateBracket_2.jpg)
Attachments ----------------
56DodgeFrontLicensePlateBracket_1.jpg (183KB - 28 downloads)
56DodgeFrontLicensePlateBracket_2.jpg (139KB - 30 downloads)
|
|
|
|
Member
Posts: 42
![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: Louisville Ky | My holes are on the underside of the bumper-not on the front like yours. If I used the piece you recommended the plate would be facing downward at a 45 degree angle. Thanks for taking yours apart to show me....
Edited by Dodge55CustomRoyal 2024-06-21 5:47 PM
|
|
|
|
![](/forums/profile/get-photo.asp?memberid=6439&type=profile&rnd=256) Extreme Veteran
Posts: 510
![500](http://forwardlook.net/forums/images/decorations/multiple/500.gif) Location: Invermere B.C. Canada - Rocky Mountains | The original bracket off my 1956 Canadian Dodge (a Plymouth or Plodge) and on the car.
(1956 front lic plate 1 (960 x 720).jpg)
(1956 plymouth hood paint 2.jpg)
Attachments ----------------
1956 front lic plate 1 (960 x 720).jpg (138KB - 27 downloads)
1956 plymouth hood paint 2.jpg (204KB - 27 downloads)
|
|
|
|
Member
Posts: 42
![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: Louisville Ky | There had to be some kind of a bracket on the bumper of a '55 Dodge so the plate wouldn't be tilted downward. Is there anyone who has a '55 who could post a pic of theirs? Hey Hondaman, what does yours look like? |
|
|