|
|
Expert
Posts: 2196
Location: Muskego, WI | Looking for a single 4 barrel intake manifold for a 318 poly, factory or aftermarket. Let me know what you have an what you're asking.
Thanks. |
|
|
|
Elite Veteran
Posts: 873
Location: ALABAMA, HEART OF DIXIE | there are three series of factory, (iron), manifolds for the 318. Early, 56/58 use the smaller WCFB carb. The 59/60 and 61/62 will accept the larger AFB.
Edited by rockerarm 2020-02-25 12:36 PM
|
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | I plan on using a NEW 500 to 600 cfm carb, so would most likely need to be adapted either way. Just hoping to find something. |
|
|
|
Expert 5K+
Posts: 7808
Location: Williams California | jboymechanic - 2020-02-25 12:02 PM
I plan on using a NEW 500 to 600 cfm carb, so would most likely need to be adapted either way. Just hoping to find something.
I have one I picked up recently. I'll check the carb bolt pattern to see which it is.
---John |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | PM sent. |
|
|
|
Regular
Posts: 54
| I have one that I believe is from a ‘57. It’s drilled for a wcfb but it has larger flanges cast that are the size of an afb. Would have to be machined for the afb to work. Pm me with your email or phone number and I can send you pictures of it. |
|
|
|
Expert 5K+
Posts: 7808
Location: Williams California | jboymechanic - 2020-02-25 9:15 PM
PM sent.
Jon, the one I have is a '58 on up, so a modern Holley or Carter will fit the bolt pattern.
---John |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | PM sent Big M. |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Manifold found and purchased. Thanks all. |
|
|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | if i were in the market for a 318 poly 4bbl intake , i'd have to give the air gap intake produced for chrysler power
some serious thought -------------------------------------------later |
|
|
|
Expert
Posts: 2196
Location: Muskego, WI | Just too much money Chuck, trying to get the car on the road on a budget. Just honing the cylinders, new rings and bearings and she's going back together. |
|
|