|
|
Member
Posts: 41
Location: Buffalo NY | Well, i ordered brake hardware from Kanter, and assumed it was all i needed, but when i recieved it, all that was in the package was 8 return springs??!! I called Kanter and they told me that is all they sell for my 58 Plymouth with manual 12" drums? WTF! Does anyone know if i can use hardware from another application on my 58 Plymouth Belvedere???
Please help, my car has been hung up most of the summer with a brake hardware issue. Id like to enjoy it before the snow flies!
Thanks!! |
|
|
|
Expert 5K+
Posts: 6502
Location: Newark, Texas (Fort Worth) | You, trusted Kanter? I believe if know the width and diameter if drums, You can search for the hold downs for them. I haven't seen any kit for our cars. Just generic stuff like this:
https://www.summitracing.com/parts/dhb-hw7250?seid=srese3&cm_mmc=pla...
|
|
|
|
Expert 5K+
Posts: 5006
| what do you need exactly? |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | I am sure that John at BigM has what you need. Give him a call. |
|
|
|
Expert 5K+
Posts: 9911
Location: Lower Mainland BC | If you can point out what you need from the diagrams below, we might have a better chance of helping you.
(Brakes_55-56Plymouth.jpg)
(Brakes_57Plymouth.jpg)
(Brakes_55-58Mopar.jpg)
(Brakes_55-58Mopar_somePNs.jpg)
Attachments ---------------- Brakes_55-56Plymouth.jpg (127KB - 165 downloads) Brakes_57Plymouth.jpg (200KB - 180 downloads) Brakes_55-58Mopar.jpg (157KB - 180 downloads) Brakes_55-58Mopar_somePNs.jpg (226KB - 171 downloads)
|
|
|
|
Member
Posts: 41
Location: Buffalo NY | Well, According to the very helpfull pics put up here by some great people, i am able to deturmine that the springs i got from Kanter are the only thing i may need. I havent pulled it apart yet, i dont have a wheel puller, but i may be in luck, thanks all for your imput.
Jay |
|
|
|
Expert 5K+
Posts: 9681
Location: So. Cal | Make sure that you have the hold down springs & retainers on there 5-25-1, 8. The brakes will grab and pull terribly without them. |
|
|