The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Filler Neck
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
Dodge5&
Posted 2015-12-09 4:17 PM (#497461)
Subject: Filler Neck



Member

Posts: 9

Location: Cyprus		Dear all.

Im looking for filler neck , hose and o-ring for my Dodge Kingsway deluxe 1958 4 door sedan.
Do you have any pictures of the filler neck just to see what im looking for?



(fdf.jpg)



(fuel.jpg)



(12358239_10153329269093226_150018425_n.jpg)



Attachments
----------------
Attachments fdf.jpg (47KB - 117 downloads)
Attachments fuel.jpg (53KB - 128 downloads)
Attachments 12358239_10153329269093226_150018425_n.jpg (96KB - 117 downloads)
Top of the page Bottom of the page
Dodge5&
Posted 2015-12-10 2:02 AM (#497534 - in reply to #497461)
Subject: Re: Filler Neck



Member

Posts: 9

Location: Cyprus		Is there anything missing?. Is the filler neck there?
Top of the page Bottom of the page
wizard
Posted 2015-12-10 6:36 AM (#497540 - in reply to #497461)
Subject: Re: Filler Neck



Board Moderator & Exner Expert 10K+

Posts: 13055
50005000200010002525
Location: Southern Sweden - Sturkö island		Hi Andreas - please update your profile with your location, seems that you come frome Scandinavia?

The filler neck in your photos is what you need - the filler neck consists of;
- Filler neck (the tube from the fuel door in the fender)
- The rubber grommet that insulates the filler neck from the hole in the body.
- The o-ring that is mounted in the tank.

Be sure to get an O-ring made out of Viton or even better Viton B. That is the only rubber material that can handle both gasoline AND ethanol alcohol.

Mount the tank first with the tank bands. Grease the filler pipe with o-ring grease or, in lack of it, even some hand dishwashing, like Yes mixed up with some water. This will ensure that the o-ring doesn't turn around and fall down in the tank instead of sealing the filler neck.

Please post some Pictures and a short story about your car under Members Rides


Top of the page Bottom of the page
Dodge5&
Posted 2015-12-11 2:03 AM (#497622 - in reply to #497461)
Subject: Re: Filler Neck



Member

Posts: 9

Location: Cyprus		Thanks a lot for your reply! So the filler neck is there? I do not need to get one?. Sorryyy I will update my profile. Im from Cyprus and im going to post some pictures and a short storry of my car soon
Top of the page Bottom of the page
Dodge5&
Posted 2015-12-11 5:02 AM (#497633 - in reply to #497461)
Subject: Re: Filler Neck



Member

Posts: 9

Location: Cyprus		So the tube in the second picture is the filler neck? Do you know where i can find rubber grommet and o-ring?
Btw my car is right hand drive, and the fuel is on the left side...No difference regarding the fuel tank?!
Top of the page Bottom of the page
wizard
Posted 2015-12-11 5:19 AM (#497634 - in reply to #497461)
Subject: Re: Filler Neck



Board Moderator & Exner Expert 10K+

Posts: 13055
50005000200010002525
Location: Southern Sweden - Sturkö island		Yes, that's the filler neck - I'm slightly confused about the inner piece - that doesn't seem to have been there. The spare part manual doesn't list inner and/or outer filler neck parts - only "filler neck".

As for the o-ring, you must check locally first - go to a well assorted hydraulic hose company for instance - bring the filler neck with you and ask for a VITON O-ring. They don't cost an arm, so you could take a couple with different thickness.

For me, the White painted part looks like the grommet - lift up the filler neck and check. Otherwise, Gary Goers should have the grommets.
Top of the page Bottom of the page
Dodge5&
Posted 2015-12-12 2:28 AM (#497733 - in reply to #497461)
Subject: Re: Filler Neck



Member

Posts: 9

Location: Cyprus		Im also confused ;/ how the inner piece looks like? Any picture to understand what im looking for ;/
The filler neck come out from that 4 screws?
Top of the page Bottom of the page
Dodge5&
Posted 2015-12-12 2:50 AM (#497735 - in reply to #497461)
Subject: Re: Filler Neck



Member

Posts: 9

Location: Cyprus		Maybe is the inner piece that im missing !!?? What is the name of that piece , so i can search in the internet?
Top of the page Bottom of the page
59 in Calif
Posted 2015-12-12 7:42 PM (#497790 - in reply to #497461)
Subject: Re: Filler Neck


Elite Veteran

Posts: 1102
1000100
Location: Hayward, Calif		The 4 screws you see in that pic is for the outer tube only. There is also a rubber gasket under it. You should be able to see part of it when you look inside the fender. The inner tube, where the gas cap goes extends all the way thru the outer tube and connects to the tank. This is the tube that holds the gas and is sealed at the tank with an O ring. If you look closely at the pic you will see a rubber sleeve wrapped around the inner tube, just below the cap. Gary Goers has this sleeve. The inner tube slides into the outer tube. If you are missing the inner tube, John at Big M or that guy in AZ. should have one. These guys both know which tube your looking for. When you look under the car you will see the outer tube extending thru the trunk floor 3 - 4". You will also be able to see the inner tube that extends thru the outer tube and attaches to the tank. As far as I know it's just called a 'gas tank fill tube' . Jerry
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)