|
|
Expert
Posts: 1497
Location: Fairfax, Minnesota | I am looking for a permanent spray adhesive that allows easy repositioning before it set/cures. I am applying a thin fabric/foam sandwich to an inset in a vinyl door panel. It must fit perfectly. Any suggestions? Thanks |
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | I Use the 3M Glue as many other brands don't allow you to move things around as they bond to quick . There is a few versions on ebay , do a bit of research as we only get one type here in Australia . But you have many choices over there . Its expensive but you wont be sorry . Here is a link to one of the strong bond ones , but read about a few other 3M ones on ebay . |
|
|
|
Expert 5K+
Posts: 6513
Location: Newark, Texas (Fort Worth) | This company makes quality products:
http://www.loctiteproducts.com/p/14/17/a_cntct_pro/overview/Loctite... |
|
|
|
Expert 5K+
Posts: 5014
| |
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | I didn't say 3M was the strongest but its the only one I have used that you can reposition things which is what was asked for . But I haven't had issues with Adhesion with 3M myself . They spend a lot of money and time to get things right . If there is a problem its generally the operator . |
|
|