The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

flathead damper
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
zrxkawboy
Posted 2015-07-31 8:28 AM (#485713)
Subject: flathead damper


Veteran

Posts: 168
1002525
Location: SD		OK, another flathead 6 question: what's the best way to remove the damper? There are no holes to thread in a puller. Soaking with penetrating oil and some gentle persuasion has done nothing. Thanks!
Top of the page Bottom of the page
57plymouth
Posted 2015-08-01 7:21 AM (#485819 - in reply to #485713)
Subject: Re: flathead damper



Expert

Posts: 3577
20001000500252525
Location: Blythewood, SC		I've torn four of these down and every one has had holes that are not threaded. Put a bolt through with a nut on the back.
Top of the page Bottom of the page
zrxkawboy
Posted 2015-08-01 12:10 PM (#485838 - in reply to #485713)
Subject: Re: flathead damper


Veteran

Posts: 168
1002525
Location: SD		After I read your reply, I went out and scraped the grime off, and voila! Two holes! They were so filled with dirt/grime that they didn't show up at first! Thanks again for coming to my rescue, Brian.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)