Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!
Posts: 19146
Location: bishop, ca | The door condition-situation :"is what it is".....
You'll have to use tightly-stretched, and/or glued-down.....(as opposed to loose-and-sloppily installed) upholstery cloth on your car's doors, if the
OEM printed-vinyl door-material is not available to you (and probably Unobtanium...)
But, you gotta do what you gotta do, and properly installed and presented upholstered door panels will look just fine.
You'll probably have to glue it to some stiff backing---like hardboard or cardboard
At least, you will have the opportunity to experiment with the upholstery's installation-appearance
before deciding upon the best-looking alternative.
Edited by d500neil 2015-07-21 8:11 PM
|