The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

318 LA and late model trans into a 1957 plymouth
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
dhunter93
Posted 2014-12-20 7:25 PM (#465355)
Subject: 318 LA and late model trans into a 1957 plymouth


Member

Posts: 24

Hi all, anyone know what I need to replace a poly 301 with a late model 318 and auto trans? Does someone make motor mounts ? will the poly mounts work? will the trans cross member work?

Thanks in advance!
Top of the page Bottom of the page
Rodger
Posted 2014-12-20 10:12 PM (#465372 - in reply to #465355)
Subject: Re: 318 LA and late model trans into a 1957 plymouth


Expert

Posts: 1506
1000500
Location: Colo Spgs		Hola Hunter

The 301's Oil Pan and Pick Up will bolt to any LA-273/ LA-318 or LA-340's Block. This is nice for it makes it possible if you have "fitting problem's".

The 301's Mounting Bracket's are the same --- To the LA Block.

The LA Series Right Side Exhaust Manifold is a Center Dumping Unit - just as The 301's. It is the Lift Side "clearance routing" that you may have some issues with.

A 1966-1962 Dodge Truck Automatic will have a Emer Brake located as where you do now and Push Buttons too.

Is The LA Engine from a Car or The Van/ Truck Division ??? What year is it ???



Rodger & Gabby
COS
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)