The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

392 Hemi water pump pulleys
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Heating, Cooling and Air ConditioningMessage format
 
jboymechanic
Posted 2014-09-20 3:17 PM (#456900)
Subject: 392 Hemi water pump pulleys



Expert

Posts: 2196
2000100252525
Location: Muskego, WI		I'm installing the water pump and power steering pump onto my 354 Hemi. As I understand the setup, it uses a 2 groove crank pulley that lines up with the ps pump and inner water pump pulley. There should be a larger OD water pump pulley that then drives the AC compressor and generator. Is there a spacer between the inner and outer water pump pulleys? The pulleys I have seem to nest to close together as is and the outer pulley has a larger pilot hole than the pilot on the water pump. Does someone have the details to this setup?

Also, where do the heater hoses run on a 392? There is only one port on the water pump housing.
Top of the page Bottom of the page
LD3 Greg
Posted 2014-09-20 5:22 PM (#456910 - in reply to #456900)
Subject: RE: 392 Hemi water pump pulleys


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada		As I recall, the 56 Imp 354 could be quite different than a 392 or my 58 354. The latter uses a 4 groove crank pulley to drive the two pair of belts. That pulley is a one piece unit.

I'll post some pics. Hard to see!!
Greg
Top of the page Bottom of the page
LD3 Greg
Posted 2014-09-20 5:24 PM (#456912 - in reply to #456910)
Subject: RE: 392 Hemi water pump pulleys


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada		Here are my pics.
Greg



(image.jpg)



(image.jpg)



(image.jpg)



(image.jpg)



(image.jpg)



Attachments
----------------
Attachments image.jpg (215KB - 213 downloads)
Attachments image.jpg (218KB - 215 downloads)
Attachments image.jpg (235KB - 213 downloads)
Attachments image.jpg (204KB - 213 downloads)
Attachments image.jpg (187KB - 204 downloads)
Top of the page Bottom of the page
jboymechanic
Posted 2014-09-22 10:57 AM (#457030 - in reply to #456900)
Subject: Re: 392 Hemi water pump pulleys



Expert

Posts: 2196
2000100252525
Location: Muskego, WI		Thanks for the pictures Greg, much appreciated. I do have a 4 groove crank pulley, I'll have to dig it out and line things up. Do you know the part numbers for the belts? That crank/AC/generator belt must be pretty darn long.

Edited by jboymechanic 2014-09-22 10:58 AM
Top of the page Bottom of the page
Swept57
Posted 2014-09-23 11:34 AM (#457168 - in reply to #456900)
Subject: Re: 392 Hemi water pump pulleys



Expert

Posts: 1622
1000500100
Location: Seville, OH		This might help...

http://www.ebay.com/itm/221555004145?ssPageName=STRK:MESELX:IT&_trk...

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)