The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Vickers Power Steering Pump Shaft Seal
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
bbrasse1
Posted 2014-07-18 5:08 PM (#449612)
Subject: Vickers Power Steering Pump Shaft Seal


Extreme Veteran

Posts: 537
50025
Location: Upstate NY		Has anyone gotten a new shaft seal for a 57-58 Vickers pump? The one Rock carries is perfect shaft diameter and width but the bore is 1.25 and the bore in the pump is 1.31. I have 3 pumps and they are all the same so I know it is the correct bore size. I hate to go to seal companies and pay the minimum order amount for one seal if someone has bought one recently and can share the make and part number.
Thanks
Top of the page Bottom of the page
Shep
Posted 2014-07-18 7:19 PM (#449622 - in reply to #449612)
Subject: Re: Vickers Power Steering Pump Shaft Seal



Expert

Posts: 3400
20001000100100100100
Location: Chestertown, NY ( near Lake George)		Bob, go to Napa they have a seal catalogue and may be able to match it up.
Top of the page Bottom of the page
57chizler
Posted 2014-07-19 7:36 PM (#449710 - in reply to #449612)
Subject: RE: Vickers Power Steering Pump Shaft Seal



Expert

Posts: 3778
20001000500100100252525
Location: NorCal
I have a very old Trostel seal catalog and that '54-'57 pump calls for a seal that's 3/4" X 1.254" X 1/4" (#423294).

CR seal #7481 has the following dimensions, .750 X 1.301" X .250"

http://www.ebay.com/itm/like/291126062097?lpid=82
Top of the page Bottom of the page
bbrasse1
Posted 2014-07-20 7:41 AM (#449742 - in reply to #449710)
Subject: RE: Vickers Power Steering Pump Shaft Seal


Extreme Veteran

Posts: 537
50025
Location: Upstate NY
57chizler - 2014-07-19 7:36 PM


I have a very old Trostel seal catalog and that '54-'57 pump calls for a seal that's 3/4" X 1.254" X 1/4" (#423294).

CR seal #7481 has the following dimensions, .750 X 1.301" X .250"

http://www.ebay.com/itm/like/291126062097?lpid=82


Big thanks! That will save me a lot of time and money. Hope I can do the same for you someday.
Top of the page Bottom of the page
58coupe
Posted 2014-07-20 11:20 AM (#449752 - in reply to #449612)
Subject: Re: Vickers Power Steering Pump Shaft Seal



Expert

Posts: 1740
100050010010025
Location: Alaska		What do you mean "minimum order amount"? We have local bearing and seal stores that can match up just about any bearing or seal and you can buy just one if you want.
Top of the page Bottom of the page
bbrasse1
Posted 2014-07-21 9:23 PM (#449972 - in reply to #449612)
Subject: Re: Vickers Power Steering Pump Shaft Seal


Extreme Veteran

Posts: 537
50025
Location: Upstate NY		Many of the seal companies won't sell you one and have a minimum order. I got one coming from eBay. Thanks I may need a referral to one of your sources in the future.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)