|
|
Expert
Posts: 2120
 
Location: atlanta | Don't really wanna run the canister, I know ya need the Hot Heads bypass thingy, but what then? |
|
| |
|
Expert 5K+
Posts: 8948
   
Location: WHEELING,WV.>>>HOME OF WWVA | you don't need no thingy . just get an adapter , straight or offset , put a filter on it . with those shorty headers , get an offset one --------------------------------------later |
|
| |
|
Expert
Posts: 2120
Location: atlanta | Really? thanks Chuck, I have an adapter already, I'll post a pic asap, when the motor comes back I'll check it out. No filter bypass thingy needed? |
|
| |
|
Expert 5K+
Posts: 8948
Location: WHEELING,WV.>>>HOME OF WWVA | no |
|
| |
|
Expert
Posts: 3036
Location: N.W. Fla. | From what it says in the Tex Smith Hemi Book you can take the spin on assembly off an LA engine & put it on the A Poly. On the hemi the "By pass plug" replaces the anti-drain back check ball, I assume that the Poly has a similar check ball. |
|
| |
|
Expert
Posts: 2120
Location: atlanta | Yes, but mine is a 61 Poly with the old cartridge filter, does this info still apply? |
|
| |
|
Expert
Posts: 2905
Location: little rock, AR | There is a spin-on adapter that can be used on a poly. I do not have that info but I know there is one made for the poly. Let me know when you get one because I need it for my '59 Belve. |
|
| |
|
Expert
Posts: 2120
Location: atlanta | Someone syas Fram kakes a kit to convert or the dealer has the parts, I just need to know if it's for a 61 poly and earlier. when did the spin on become available on the poly? |
|
| |
|
Elite Veteran
Posts: 873
Location: ALABAMA, HEART OF DIXIE | fenix - 2014-09-29 11:51 PM Really? No filter bypass thingy needed?
A plate and center nut adapter from any LA engine will work on your poly. Or you can use the later 90% adapter if you are having header clearance issues. both will accept a fram PH43 or PH8A spim on filter. First thing I do on any poly 318's I own. |
|
| |
|
Expert
Posts: 2120
Location: atlanta | Okay, Thanks Will, thanks all!
|
|
| |
|
Expert 5K+
Posts: 8948
Location: WHEELING,WV.>>>HOME OF WWVA | the only things you need are a 90 degree or straight adapter and filter of your choice and a gasket .-------------------------------------------------later
|
|
| |
61 318 oil filter
