Viewing a thread - A SPRING from a vacuum advance or even a complete vacuum advance unit

You are logged in as a guest. ( logon | register )

A SPRING from a vacuum advance or even a complete vacuum advance unit Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Swap Meet -> Wanted - All Wanted Ads	Message format

lonesome mopar

Posted 2021-05-10 5:17 PM (#611872)
Subject: A SPRING from a vacuum advance or even a complete vacuum advance unit

Extreme Veteran

Posts: 397
100

Location: Milano, Italy

Hello

I am looking for the SPRING that goes into the vacuum advance unit of a Poly, 1958 and up to LA models as they say they are all the same.

I need just the original spring, but I can buy the complete vacuum unit, if you wish, or even ( I suicide myself) a complete timer.

Anybody would help this very old man looking for this spring from decades?

Thank you

56D500boy

Posted 2021-05-10 6:53 PM (#611873 - in reply to #611872)
Subject: RE: A SPRING from a vacuum advance or even a complete vacuum advance unit

Expert 5K+

Posts: 9996
5000

Location: Lower Mainland BC

Ciao Antonio. It would help if we knew what the distributor number is e.g. IBP-4005. That helps tracking down the vacuum pot spring PN and then hunting for a NOS spring, like 1818 572 (Just an example).

(55-58Distributor_PartsDiagram.jpg)

(55-58Distributor_PartsListing_ExampleVacuumPotSpring.jpg)

Attachments
----------------

55-58Distributor_PartsDiagram.jpg (76KB - 100 downloads)
Attachments

55-58Distributor_PartsListing_ExampleVacuumPotSpring.jpg (181KB - 103 downloads)

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)