|
|
Regular
Posts: 86
![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: MN | Hi,
When converting from a 2 barrel to a 4 barrel setup using an original intake and carb, does the existing throttle linkage work or is that something I'll have to look for also?
Thanks, |
|
|
|
![](/forums/profile/get-photo.asp?memberid=6620&type=profile&rnd=248) Expert
Posts: 2004
![2000](http://forwardlook.net/forums/images/decorations/multiple/2000.gif) Location: Branson, MO | Should work. I believe there is adequate linkage adjustment available for proper connections.
|
|
|
|
Regular
Posts: 86
![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: MN | Thank you J.F. I appreciate it. |
|
|
|
![](/forums/profile/get-photo.asp?memberid=1437&type=profile&rnd=893) Expert
Posts: 3785
![2000](http://forwardlook.net/forums/images/decorations/multiple/2000.gif) ![1000](http://forwardlook.net/forums/images/decorations/multiple/1000.gif) ![500](http://forwardlook.net/forums/images/decorations/multiple/500.gif) ![100](http://forwardlook.net/forums/images/decorations/multiple/100.gif) ![100](http://forwardlook.net/forums/images/decorations/multiple/100.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) ![25](http://forwardlook.net/forums/images/decorations/multiple/25.gif) Location: NorCal |
Because the 2-barrel carb has the throttle lever in the middle and the 4-barrel lever is further forward, you'll have to lengthen the top rod to reach the 4-barrel lever. If you just pull the rod forward to reach the lever, most of your throttle travel will be used up and you won't be able to attain WOT. |
|
|