Viewing a thread - 413 guru needed

You are logged in as a guest. ( logon | register )

413 guru needed Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Engine, Exhaust, Fuel and Ignition	Message format

Ray

Posted 2007-05-13 10:22 PM (#82829)
Subject: 413 guru needed

Expert

Posts: 1497
1000

Location: Fairfax, Minnesota

Can someone tell me how to identify a 413 crank, stampings, etc.

and.... I have found 2 different strokes associated with this crank, 3.75 and 3.70. One source specifically mentions that the 413 crank has a slightly smaller stroke that the 426 or 440.

Any feedback would be greatly appreciated,

Ray

dukeboy

Posted 2007-05-13 10:35 PM (#82831 - in reply to #82829)
Subject: RE: 413 guru needed

Expert 5K+

Posts: 6203
5000

Location: Big pimpin'

Never heard of that? As far as I know the 383 RB, 413 Rb, 426W RB, 426 HEMI, & 440 RB all have the same stroke cranks..
The only diff. that I know of is the eight bolt flange on the HEMI cranks and some of the early 383 RB's I think...It's only .050" diff., so I can't see the factory makin' two different cranks over .050".........

Looks like you may have a misprint there............

narleycharlie

Posted 2007-05-13 10:41 PM (#82833 - in reply to #82829)
Subject: Re: 413 guru needed

Expert

Posts: 1812
1000

Location: Slidell La.

I 2nd that , all rb 's have the same stroke . The B's have the short stroke .

dukeboy

Posted 2007-05-13 10:48 PM (#82835 - in reply to #82833)
Subject: Re: 413 guru needed

Expert 5K+

Posts: 6203
5000

Location: Big pimpin'

Now with the 413 TRUCK,MARINE & INDUSTRIAL engines well, anything is possible..........

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)