The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

complete power window set up
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
bill61648
Posted 2014-04-22 9:22 PM (#437326)
Subject: complete power window set up


Member

Posts: 13

Location: stamford, ct.		I would like to get a complete power window setup that fits a 4 door hardtop chrysler or desoto 60 or 61. may be the same for a dodge or plym 4 door hardtop. need regulators, motors switches and complete wiring harness. want to convert my 61 new yorker wagon to power windows Bill 203 302 1934
Top of the page Bottom of the page
56300B
Posted 2014-04-22 10:53 PM (#437334 - in reply to #437326)
Subject: RE: complete power window set up



Extreme Veteran

Posts: 480
100100100100252525
Location: The Great Northwest		Bill,

I just finished doing the power window conversion in my 61 NYer four door hardtop and it is very gratifying. It is also a lot of work that requires a lot of scrounging for very specific parts needed for inside the doors not the least of which is the rear window regulators for a four door hardtop. Punching the holes in the doors and jams is a real hoot that is much easier with the doors removed but can be done with the doors still on the car. You might want to check out Wizard's thread on doing the conversion without replacing the vinyl on the door panels. Let me know if you need any assistance during the install.

Arland



(PW Panels R.JPG)



(Side Windows R.JPG)



Attachments
----------------
Attachments PW Panels R.JPG (194KB - 43 downloads)
Attachments Side Windows R.JPG (195KB - 51 downloads)
Top of the page Bottom of the page
60 Imp
Posted 2014-04-23 6:13 AM (#437367 - in reply to #437326)
Subject: RE: complete power window set up


2000100050025
Location: North Australia		Yep, The Wizard is the Man to talk to! Dude is ACD all the way

To my mind doing this type of upgrade is a hell of a job. I have never done it and I don't know anyone who has, only fellers on here.

The donor and the recipient next to each other would be the best way, unless you are skilled in the art................

Steve

Edited by 60 Imp 2014-04-23 6:15 AM
Top of the page Bottom of the page
oldwood
Posted 2014-04-23 9:43 AM (#437382 - in reply to #437326)
Subject: Re: complete power window set up


Expert

Posts: 2905
2000500100100100100
Location: little rock, AR		I have 2 '59 imperials ans a '57 Imperial with those parts. Will they work on your application???
Top of the page Bottom of the page
56300B
Posted 2014-04-24 2:48 AM (#437539 - in reply to #437382)
Subject: Re: complete power window set up



Extreme Veteran

Posts: 480
100100100100252525
Location: The Great Northwest		Those Imperials will not work for the 61.
If you want to add power windows to your 61 four door hardtop, the setup from these vehicles will fit your car:

Front doors
'60-'64 Chrysler 4-door sedan and HT
Desoto '60-'61 4-door HT
Dodge '60-'61 4-door sedan and HT
Dodge '62-'64 880 series 4-door sedan and HT
Plymouth '60-'61 4-door sedan and HT

The rear door regulators will work from the same cars, but MUST be either a 4-door hardtop or 4-door hardtop Suburban wagon.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)