|
|
| hey gang...i was wondering if anyone ever made a 4 bbl intake for the poly 325? i dont know if any of them came factory like that or if anyone made one in the aftermarket. If not, will any other engine's intakes swap on? i have heard that the 325 poly is a lot more closely related to the early hemis of the time...i wonder if any of those intakes might fit? thanks 
Jon and Jessica |
|
| |
|
Extreme Veteran
Posts: 520
Location: Colorado Springs, Colorado | The 325 was avalible with a 4bbl intake, look on dodges of the era. The intake from a poly or a 325 hemi will fit. |
|
| |
|
| There was a 4 bbl intake for sale on ebay that went for 200+ bucks!!!! thats crazy! do they normally go for that price??
Jessica |
|
| |
|
Board Moderator
Posts: 3186
   
Location: The not-so-great, dirty-white North ( Michigan) | Jessica...
I have seen them go from anywhere from a low of $37.00 and change to one that went for about $340.00 (with a carburetor).
Now that you know what fits, keep looking. You will pick one up eventually.
Also, I know some people that might have one. Do not know what type of price they want, though.
|
|
| |
|
Veteran
Posts: 233
Location: Oxnard/Ventura, California | The red ram got the 2 barrel, super red ram got the 4 barrel, and the d-500 got dual quads (1957) There is a six-pack manifold available for the 325 on hot hemi heads.comI have am not sure if html works here or not, but if the link doesn't work try that out. You can either use the 3 bolt manifold if you want to run stromberg 97s or get four bolt and run regular carbs on it. Its about $250 bucks for a new one. I missed out on a complete setup on ebay a few years ago, and I have been kicking my ass ever since!! Good luck! |
|
| |
more 325 poly questions
