-------Original Message-------
Date: 09/17/20 22:04:02
Subject: Re: rear brake hose woes
The RAYBESTOS BH36048 hose cross references to OEM Part Number(s): 02207918, 2207918, 9740130 and that hose is
10.80 inches long.
How good the shocks and springs on your 1965?
Thanks,
Gary H.
> -------Original Message-------
>
>
> Anybody had problems finding a correct length rear brake hose for a 65
> coronet?? I ordered two locally from napa and auto zone- Too short. I
> called summit and they listed one but they measured it at 10.88
> inches. Too short. The one i pulled off the car measures about 13. I
> trial fit one of the short ones and if you raise the car and let
> rearend dangle it puts a pull or bind on the hose. It is pulled
> completely straight . Doesnt seem right. In some strange driving
> condition seems like u could snap your hose. There is a local place
> here that can make me up one,, but of course its not gonna look
> factory and wont have the nifty slide lock collar to hold it to the
> brake line bracket. And will cost me 3x as much.
> Neal --
> --
>
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.