Re: dynamat and carpeting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: dynamat and carpeting



Hi Neal,

If you search for D100 DEI you will find the install I did on my truck.

I used 3M adhesive and the carpet is not going anywhere a year later. There are other brands likely that are just as good. The trick is to let it get tacky before putting down the under-lament and or carpet. I think the 3M stays tacky longer but just my experience.

Conrad

On Aug 19, 2020, at 7:47 PM, neal zimmerman <neal.zimmerman@xxxxxxxxx> wrote:


Hi folks. Kind of a weird question. I dynamatted the whole inside of the cuda. I trial fitted the carpet kit and it seems like the foil surface of the dynamat is too slippery and the carpet will just slide on it. I thought of spraying a light coat of rubberized undercoating on the dynamat to help grip the carpeting.  Anybody ever done this? or am I just being weird.
   Neal Zimmerman, Eugene Oregon

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CANQhizQU6uzzmL8b4BtSu65%3DqR5ua7SHp6_AMckUfbeDGqGaDg%40mail.gmail.com.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/801FA338-E62D-43F9-BC03-0D5B76BD86AA%40gmail.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.