Re: max wedgebheads with edlebrockontake

[Bob G 63 <robertguez649@xxxxxxxxx>]

Thank you for the advice. I decided on trying the performer rpm. Does anyone know if i can use the stock valley cover?If not whick one fits . Checked 440 source they have one but have to remove one head to install it. Seems senseless to me. Thanks

On Monday, May 4, 2020 at 4:32:32 PM UTC-4, Bob G 63 wrote:

i'd like to know if i could use a performer rpm dual plane intake manifold on my 440 with max wedge heads.I know there will be a port mis match burt my concern is a vacum leak. i have a cross ram for it but want to fire it up with a single carb before installing the cross ram.

Thanks

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/f94e5743-a5f8-4e38-8b98-95f348f971c9%40googlegroups.com.