I found that the two rear studs on each side are shorter than the rest of the studs. Has anyone else seen this or is this something that may have been done by a machine shop when the engine was rebuilt years ago by another owner. I've looked at exhaust stud kits and all of the studs in the kits seem to be the same length.
It did help get the manifolds off but the rear stud on each side was the one that was leaking.
Dennis C.
On Friday, August 9, 2019 at 6:26:16 AM UTC-7, dennis.1963ply wrote:
Hello,
I have put up enough with a couple of exhaust studs leaking coolant. The guy who put it together (me) many years ago must not have sealed them well enough. What do you guys recommend for sealing the studs.
Thanks
Dennis C.