Re: Size of bolt on crank
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Size of bolt on crank



I could not find the socket I used on a Poly 318 crank but I was able to use a box wrench to measure an LA 318 I had in 
storage and it was indeed a 1 1/4" bolt. I'm pretty sure both LA and Poly 318 motors use the same bolt.

Bruce Toth from Toth Performance in PA I think is still a member of this Mail List. He rebuilds Poly engines would know 
for certain. You can call Bruce and ask. His phone # is in the "engine" section of the 62-65 vendor's page.
http://1962to1965mopar.ornocar.com/restoration-sources.html

Thanks,
Gary H.

>  -------Original Message-------
>  From: Cornelius DeVries  
 
>  I almost sure it’s 1 1/4”.
>  
>  Sent from my iPhone
>  
>  > On Aug 7, 2019, at 06:17, < > < > wrote:
>  >
>  > I can take a look to find out Thursday and reply, if no one provides the size before then.
>  >
>  > Thanks,
>  > Gary H.  
>  >
>  >> -------Original Message-------
>  >
>  >>
>  >> Anyone know what size the bolt is that is on the front of the block
>  >> for a 1962 Poly 318? I want to find, clean and mark the timing mark,
>  >> but can move the crank as it needs a huge socket.
>  >>
>  >> If you could tell me the size I don't have to go buy 10 of them and
>  >> hope one fits.
>  >>
>  >> Thanks
>  >>
>  >> --
>  >
>  > -- 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20190808143729.27434.qmail%40server309.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.