Re: Proportioning Valve for disc brake conversions

I used a manual disc/drum master and prop valve from a 78 dodge truck and mounted it where the original t was for the 4 wheel drums. Then just made new lines from the master to the valve. It is on a 64 Polara.

Jason

-----Original Message-----
From: Derrick Brown <derrickb81@xxxxxxxxxxx>
To: The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx>
Cc: Derrick Brown <derrickb81@xxxxxxxxxxx>
Sent: Sat, May 11, 2019 7:22 pm
Subject: Proportioning Valve for disc brake conversions

Hello All,

I wanted to know if anyone knows of a fixed proportioning valve, versus adjustable, for my car.

It was a factory 4 wheel manual drum.

I have the dual manual master cylinder ( though I think it isn’t capable of satisfying my new front discs.)

So I now have manual front discs and manual rear drum.

Does anyone make a straight proportioning valve for my application?

Thanks in advance,

Derrick Brown

63 Sport Fury, 4 Speed, 426mw

You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.

To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.

To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/AB2588A1-C8F9-43AC-BFB5-B93C725E5C96%40comcast.net.

For more options, visit https://groups.google.com/d/optout.